Page 37 - Станочный парк английская версия

PRODUCTION AUTOMATION

Table of parameters of the gear ring gear. Table of parameters of the gear ring gear.
Calculation sequence number: 1140. The serial number of the calculation: 1141.
Date: 04/10/2016; Time 20 hours. 34 minutes Date: 04/10/2016; Time 20 hours. 46 minutes

Module m 7.000 Module m .800
Teeth number z 18 Teeth number z 17
Dip angle 16˚00 ‘ 00’’ Normal rack - GOST 9587-81
Tooth line direc- - right tooth profile
tion Offset coefficient x -0.100

Normal rack - GOST 13755-81
tooth profile Precision ac- - 8-D
Offset coefficient x 0 cording to GOST
1643-81

Precision ac- - 7-В total normal W -0.038
cording to GOST length 3.679
1643-81
Constant chord Sc -0.140 - 0.076
Pitch diameter d 13.600
9.709.
Fig. 5.
-0.280
Height to hc 5.194
constant chord
Pitch diameter d 131.078

Fig. 3.
Table of the gears of the wheel. Table of the gears of the wheel.
Calculation sequence number: 1140. The serial number of the calculation: 1141.
Date: 04/10/2016; Time: 20 hours. 34 minutes Date: 04/10/2016; Time 20 hours. 46 minutes

Module m 7.000 Module m .800
Teeth number z 60 Teeth number z 18
Dip angle 16˚00 ‘ 00’’ Normal rack - GOST 9587-81
Tooth line direc- - left tooth profile
tion Offset coefficient x -0.100
Normal rack - GOST 13755-81
tooth profile Precision ac- - 8-D
cording to GOST
Offset coefficient x 0 1643-81

Precision ac- - 7-В total normal W -0.038
cording to GOST length 3.690
1643-81
total normal W -0.200 - 0.076
length Pitch diameter d 14.400
161,571
Fig. 6.
-0.340
Pitch diameter d 436.926

Fig. 4.

Stanochniy park 37