Page 38 - Apprentice Manual_Neat
P. 38

Task 33)  Maintain/install/inspect day tanks


               a       High, low and alarm limits
               b       Rupture basin alarm
               c       Corrosion on top of tank
               d       Overflow controls/pump-back system
               e       Piping
               f       Power source
               g       Proper piping material and sizing
               h       Solenoid and by-pass valves
               i       Proper operation of floats and controls
               j       Pumps and motors

        Reference:
        EGSA (2015).  On-Site Power Generation Reference Book, Fifth Edition.  Boca Raton, Florida:
        Electrical Generating Systems Association.  Chapters 8, 9


        Task 34)  Maintain/install/inspect gaseous fuel regulators

               a       Primary and secondary
               b       Proper pressure to generator skid/engine
               c       Proper sizing of regulator and piping
               d       Convert natural gas systems to LP
               e       Fuel source
               f       Demand issues


        Reference:
        EGSA (2015).  On-Site Power Generation Reference Book, Fifth Edition.  Boca Raton, Florida:
        Electrical Generating Systems Association.  Chapter 8


        Task 35)  Maintain/install/inspect gas valves


               a       Inspect for leaks
               b       Check voltage
               c       Determine proper sizing and proper valve configuration
               d       Fail safe
                       --normally close
               e       Proper supported and vented

        Reference:
        EGSA (2015).  On-Site Power Generation Reference Book, Fifth Edition.  Boca Raton, Florida:
        Electrical Generating Systems Association.  Chapter 8
















                                          EGSA Apprentice Certification Program Study Guide - Page  30
   33   34   35   36   37   38   39   40   41   42   43