Page 6 - Revised Catalog

Specification for Architectural Cast Stone

1. Part 1-General
1.1. Section Includes-Architectural Cast Stone
1.1.1. Scope-Cast Stone Units as shown on architectural drawings and per this
specification.
1.1.1.1. Manufacturer shall furnish Cast Stone material covered by this
specification.
1.2. Related Sections
1.2.1. Section-01 33 00-Submittal Procedures
1.2.2. Section-04 05 13-Masonry Mortaring
1.2.3. Section-04 05 16-Masonry Grouting
1.2.4. Section-04 05 19-Masonry Anchorage and Reinforcing
1.2.5. Section-04 20 20-Unit Masonry
1.2.6. Section-07 90 00-Joint Protection
1.3. References
1.3.1. ACI 318-Building Code Requirements for Reinforced Concrete
1.3.2. ASTM A 185-Standard Specification for Steel Welded Wire Reinforcement, Plain,
for Concrete
1.3.3. ASTM A615/A 615M-Standard Specification for Deformed and Plain Billet-Steel
Bars for Reinforced Concrete
1.3.4. ASTM C 33-Standard Specification for Concrete Aggregates
1.3.5. ASTM C 150-Standard Specification for Portland Cement
1.3.6. ASTM C 595- Blended Cement
1.3.7. ASTM C 1157-Hydraulic Cement
1.3.8. ASTM C 173-Standard Test Method for Air Content of Freshly Mixed Concrete by
the Volume Method
1.3.9. ASTM C 231-Standard Test Method for Air Content of Freshly Mixed Concrete by
the Pressure Method
1.3.10. ASTM C 260-Standard Specification for Air-Entrained Admixtures for Concrete
1.3.11. ASTM C 270-Standard Specification for Mortar for Unit Masonry
1.3.12. ASTM C 426-Standard Test Method for Linear Shrinkage in Concrete Masonry
Units.