Page 235 - 2020-2021 Racecar Engineering Drag Racing Parts and Accessories Catalog

2020 DRAG RACING

Performance Camshafts For Ford Supercharged 4.6/5.4L
Level 2 camshafts offer increased horsepower and an extended RPM range. Camshafts work well with stock or near-stock
engines and drivetrains, and offer superior low-end and mid-range power. Ideal when accompanied by small diameter tube
headers, low-restriction dual exhaust, aftermarket manifold, performance ignition, and 9.5:1+ compression ratio.
Part No. Application Type Power Range Adv. Duration Duration @ .050" Intake Lift Exhaust Lift
CRO62802-2 Ford 4.6/5.4L 2V, 1999-Up Hyd. 1500-6500 276°/276° 234°/234° .581" .581"
CRO62822-4 Ford 4.6/5.4L 4V, 1993-Up Hyd. Idle-5900 264°/264° 222°/222° .475" .475"
CRO62824-4 Ford 4.6/5.4L 4V, 1993-Up Hyd. Idle-7750+ 270°/270° 236°/244° .484" .484"

Full Body Roller Lifters Hydraulic And Solid Lifters
Bearings and outer races are crowned to eliminate lobe Quality hydraulic and solid lifters are available for Chevy V8. All lifters
tracking. “HIPPO” (Hi-Pressure Pin Oiler) lifters have a have a precisely ground and finished crown face for quick camshaft/
.024" orifice to direct oil to the needle bearings, improv- lifter break-in and a long life. Sold in sets of 16.
ing durability. Not available in offset designs. Sets of 16. Application Hydraulic Solid
Chevy V8 CRO66000-16 CRO66900-16
Part No. Description
CRO66200-16 SB Chevy 262-400, .842" Dia.
CRO66200H-16 SB Chevy 262-400, .842", “HIPPO” “Coolface” Solid Lifters
CRO66200TH-16 SB Chevy 262-400, .842" Dia., Tall Body, “HIPPO” CRO66900X980-16
CRO66201-16 BB Chevy 396-454, .842" Dia.
CRO66201H-16 BB Chevy 396-454, .842" Dia., “HIPPO” Chevy V8, .842" dia. lifters have a .024" oil metering
port machined into the face of the lifter to improve
Severe Duty Roller Lifters durability with no significant oil pressure loss. Ideal for
Ideal for high RPM and high cylinder pressure, high-RPM engines with high rocker arm ratios and valve spring pressures.
lightweight lifters have billet alloy bodies, and Sold in set of 16.
heavy duty blades which are raised for use with Note: Block restrictors are not recommended with “Coolface” solid lifters.
late model blocks. “HIPPO” (Hi-Pressure Pin Oiler)
lifters have a .024" orifice to direct oil to the needle bearings, improving Stainless Steel Rollerized Rocker Arms
durability. Choose standard or offset designs. Sets of 16.
Rocker arms are made of 17-4PH stainless steel, heat-treated
Description Standard “HIPPO”
SB Chevy 262-400, .842" Dia. CRO66290-16 CRO66290H-16 and fitted with oversized needle bearings, sure-lock rocker
SB Chevy 262-400, .842" Dia., Offset Int. CRO66292-16 CRO66292H-16 nuts, and ball race steel tip rollers. Lightweight, narrow
SB Chevy 262-400, .874" Dia., Offset Int. CRO66292X874-16 CRO66292X874H-16 body rockers provide plenty of clearance when used with
SB Chevy 262-400, .903" Dia., Offset Int. CRO66292X903-16 CRO66292X903H-16* large diameter valve springs or high-lift camshafts. Sold
BB Chevy 396-454, .842" Dia. CRO66291-16 CRO66291H-16 in sets of 16.
BB Chevy 396-454, .842" Dia., Endura Max CRO66291X842E-16 † — Part No. Description Ratio Stud
BB Chevy 396-454, .842" Dia., Offset Int. CRO66293-16 CRO66293H-16 CRO73601-16 SB Chevy 265-400 1.5 7/16"
CRO73641-16 SB Chevy 265-400 1.6 7/16"
BB Chevy 396-454, .903" Dia. CRO66291X903-16* CRO66291X903H-16* CRO73605-16 BB Chevy 396-454 1.7 7/16"
BB Chevy 396-454, .903" Dia., Offset Int. CRO66293X903-16* CRO66293X903H-16* CRO73612-16 SB Ford 289-351W NEW! 1.6 7/16"
SB Ford 221-351W CRO66215-16 CRO66215H-16
SB Ford 221-351W, .937" Dia., Offset Int. — CRO66378X937H-16 Jumbo Split Lock 10° Valve Stem Keepers
BB Ford 429-460 CRO66217-16 CRO66217H-16 Keepers provide twice the strength of conventional
*Severe Duty/Oversized Bearing lifters. Lifters have a .812" bearing O.D. rather than stan- 7° tapers. Machined from premium chrome moly
dard .750".
†Endura max lifters have needleless roller bushing for greater load handling ability. steel, heat treated for maximum strength, and
offered in standard, .050" higher or .050" lower installed heights. Keepers
Hi-Seat Offset Roller Lifters fit 11/32" valve stems, sold in sets of 16 pair.
Part No. Description
Roller Lifters incorporate a .180" offset, integral rev-kit CRO86110-16 Standard Installed Height
button and Crower’s “Hi-Seat” pushrod design, which CRO86110X1-16 +.050" Installed Height
allows for shorter pushrods, reducing flex for improved CRO86110X2-16 -.050" Installed Height
valve control. “HIPPO” (Hi-Pressure Pin Oiler) lifters
have a .024" orifice to direct oil to the needle bearings, Billet Performance 7° Valve Stem Keepers
improving durability. Sold in sets of 16. Machined from chrome moly and heat treated for
Part No. Description maximum strength. Keepers fit 11/32" valve stems. Sold
CRO66275-16 SB Chevy 265-400, .842" in sets of 16 pair.
CRO66275H-16 SB Chevy 265-400, .842", “HIPPO”
Part No. Description
CRO86107X1-16 +.050" Installed Height
CRO86107X2-16 -.050" Installed Height

234