Page 81 - 2020-2021 Racecar Engineering Drag Racing Parts and Accessories Catalog

2020 DRAG RACING

Suspension

U-Bolt Pads Wheelie Bar Wheels
Universal style U-bolt pads fit Billet 6061-T6 aluminum wheels
3" diameter axle tubes and are molded with a durable 4" O.D.
leaf springs up to 2-1/2" wide ALL60037 ALL60036 ALL60038 polyurethane tire that will not dent
using 1/2" U-bolt fasteners. Center alignment hole is 5/8" to accept most or give like a rubber tire. Wheels
lowering blocks or spring bolts. 1/4" thick formed steel pads have a gusseted are available with or without bearings and accept 3/8"
shock mount with a welded bung to accept 1/2" mounting hardware. mounting hardware. Mounting width: non-bearing wheel
Part No. Description is 1.625", bearing-style wheel is 1.250".
ALL60036 RH Pad Part No. Description
ALL60037 LH Pad Without Bearings (1.625" Wide Mount)
ALL60038 Dual Mount Pad ALL60510 5-Spoke
ALL60512 5-Hole
Wheelie Bar Caster Bracket Kit ALL60514 10-Spoke
ALL60500 With Bearings (1.250" Wide Mount)
NEW! ALL60511 5-Spoke
Wheelie bar caster brackets are a ALL60513 5-Hole
great start to building a wheelie bar. Extra strong double tabs include two ALL60515 10-Spoke
holes, allowing wheel bars to be easily raised and lowered. Kit accepts wheel-
ie bar wheels up to 1.625" wide x 4" diameter. Caster bracket has 3/8" I.D.
axle holes and is fabricated from .113" thick mild steel. Mounting tabs are
.235 thick mild steel. Welding required. Kit does 1 wheelie bar wheel.

Tools & Pit Equipment
Tubing Notchers
Notchers render precise joints for
more consistent welds and stronger Digital Level
cages. Available in deluxe aluminum ALL10742
or economy steel versions, notchers Digital level with magnetic base measures the angle
accept up to 2" diameter stock of a single straight surface or the angle of a joint
and automatically align and center between two straight surfaces. Displayed value on
tubing. Use in drill press or with hand the LCD screen rotates to right side up when digital
drill. Notchers adjust up to 45°. ALL10411
level is in an upside down position. Powered by three 3V CR2032 batteries
Part No. Description
ALL10400 Deluxe Aluminum ALL10400 (included). 2" x 2" x 1".
ALL10411 Economy Steel
Replacement Parts ALL10402 ALL10403 Digital Level
ALL10402 5/8"-18 Thread Adapter
ALL10403 Arbor Support Bushings (Pair) ALL10744
ALL10404 Arbor With 1/2"-20 Thread Digital level with powerful magnetic
Optional Parts base measures the angle of a single straight surface or the angle of a joint
ALL10405 Arbor With 5/8"-18 Thread
ALL10406 Drill Press Mount (ALL10411 Only) between two straight surfaces. Displayed value on the LCD screen rotates to
ALL10407 Arbor Support With Needle Bearings ALL10406 ALL10407 right side up when level is in an upside down position. Powered by three 3V
Note: Tubing notchers include 1/2"-20 arbor thread and 5/8"-18 adapter. Hole saws up to CR2032 batteries (included). 6" x 2.25" x 1.25".
1-1/8" diameter use 1/2"-20, larger hole saws use 5/8"-18 thread.
Smart Tool
Hole Saw Set
ALL10113
ALL10412
Ensure that chassis tubing is level
Use with tubing notchers. Does not include an
arbor for a hand drill. Set includes one of each size: and plumb when building roll cages or
3/4", 1", 1-1/8", 1-1/4", 1-1/2", 1-5/8", and 1-3/4". checking driveshaft angles. Powered by
a standard 9-volt battery.
Part No. Description
Individual Hole Saws
ALL10413 3/4" Smart Tool Tray
ALL10414 1"
ALL10415 1-1/8" ALL10740
ALL10416 1-1/4" Aluminum tray is a nice addi-
ALL10417 1-1/2" tion when using Smart Tool on 7/8" and
ALL10418 1-5/8"
ALL10419 1-3/4" 1" O.D. trailing arms or suspension tubes. Plastic clips allow tray to snap to
tube when in tight areas. A bubble level helps provide accurate readings.
Note: Hole saws up to 1-1/8" diameter use 1/2"-20 thread, larger hole saws use 5/8"-18 thread.
80