Page 78 - 2020-2021 Racecar Engineering Drag Racing Parts and Accessories Catalog

2020 DRAG RACING

Suspension

Low-Friction Lower Ball Joints Roller Bearing
Low-friction economical OEM ball joints are high-performance Lower Control Arm Bushings
units designed for smooth suspension travel. Some ball Free up stock front suspensions and help prevent binding
joints are available with longer than stock pin length for commonly found with stock rubber and steel insert ALL56223
correcting roll centers. Ball joints have hardened pins with bushings. Steel bodied bushings are complete with
stock type housings and are not rebuildable. Legal for needle roller bearings and hardened inserts that are
classes that require non-take-apart ball joints. For off-road use only. ready to install and do not require special mounting
Part No. Type Length hardware. All bushings have 1/2" I.D. mounting holes.
Allstar ALL56216 And Moog K727 Part No. Application Bushing Position O.D. UHL Hole Size
ALL56030 Screw-In Standard Chevelle, Monte Carlo, GM Intermediates
ALL56031 Screw-In 1/2" Longer 1964-66 Front (2nd Design) 1.345" 2.100" .500"
ALL56216 Housing With ALL56206 Pin ALL56221
ALL56034 Screw-In Standard 1967-74 Front 1.345" 2.100" .500"
ALL56035 Screw-In 1/2" Longer 1964-66 Front (1st Design) 1.645" 2.100" .500"
ALL56214 Housing With ALL56206 Pin 1975-77 Front 1.645" 2.100" .500"
ALL56049 † Screw-In Standard ALL56222 1964-72 Rear 1.645" 2.100" .500"
ALL56050 † Screw-In 1/2" Longer
ALL56051 † Screw-In 1" Longer 1978-88 Rear 1.645" 2.100" .500"
Allstar ALL56210 And Moog K5103 ALL56223 1973-77 Rear 1.900" 2.100" .500"
ALL56042 Weld-In Standard ALL56224 1978-88 Front 1.440" 2.750" .500"
Allstar ALL56212 And Moog K6117 Camaro, Firebird
ALL56044 Weld-In Standard
Allstar ALL56218 And Moog K6145 ALL56221 1967-74 Front 1.345" 2.100" .500"
ALL56046 Weld-In Standard ALL56222 1975-81 Front 1.645" 2.100" .500"
ALL56047 Weld-In 1/2" Longer 1967-72 Rear 1.645" 2.100" .500"
ALL56048 Weld-In 1" Longer ALL56223 1973-88 Rear 1.900" 2.100" .500"
†Commonly used with ALL56256 ball joint adapter sleeve.
ALL56224 1982-92 Front 1.440" 2.750" .500"
Steel Control Arm Bushings 1978-88 Metric Front Lower Control Arms
Allstar steel control arm bushings replace stock rubber bush-
ings and eliminate deflection, a common problem with
original equipment bushings.
ALL56230
Lower Control Arm Bushing Applications ALL57804 ALL57805

Part No. Application Bushing Position O.D. UHL Hole Size
Chevelle, Monte Carlo, GM Intermediates Reproduction of the originals, these new arms are a direct replacement for
1964-66 Front (2nd Design) 1.345" 2.100" .500" 1978-88 metric chassis and accept stock ball joints.
ALL56230
1967-74 Front 1.345" 2.100" .500" Part No. Description
1964-66 Front (1st Design) 1.645" 2.100" .500" ALL57804 RH
1975-77 Front 1.645" 2.100" .500"
ALL56232 ALL57805 LH
1964-72 Rear 1.645" 2.100" .500"
1978-88 Rear 1.645" 2.100" .500"
ALL56233 — — 1.645" 2.100" .562" 1964-72 Chevelle Lower Control Arms
ALL56234 1973-77 Rear 1.900" 2.100" .500"
ALL56235 — — 1.900" 2.100" .562"
ALL56236 1978-88 Front 1.440" 2.750" .500"
Camaro, Firebird
ALL56230 1967-74 Front 1.345" 2.100" .500" ALL57800 ALL57801
1975-81 Front 1.645" 2.100" .500"
ALL56232 ALL57802 ALL57803
1967-72 Rear 1.645" 2.100" .500"
ALL56234 1973-88 Rear 1.900" 2.100" .500" Reproduction 1964-72 A-body lower control arms are coated and have the
ALL56236 1982-92 Front 1.440" 2.750" .500" same fit and appearance as the factory arms. Both versions are made to
meet the same tolerance as the original. The deluxe arms have a more
Upper Control Arm Bushing Applications precise spring pocket for more consistent suspension geometry. They also
Part No. Application Bushing Position O.D. UHL Hole Size accept the larger wire diameter of heavier rated racing springs.
Chevelle, Monte Carlo, GM Intermediates Part No. Description
ALL56238 1967-72 All 1.275" 1.250" .675" ALL57800 RH
ALL56240 1978-88 All 1.530" 1.500" .695"
ALL56242 1973-77 Front 1.394" 1.500" .690" ALL57801 LH
ALL56244 1973-77 Rear 1.311" 1.425" .690" ALL57802 RH Deluxe
Camaro, Firebird ALL57803 LH Deluxe
ALL56238 1967-69 All 1.275" 1.250" .675"
ALL56242 1974-79 Front 1.394" 1.500" .690"
ALL56244 1974-79 Rear 1.311" 1.425" .690"

77