Page 147 - 2018 Racecar Engineering Drag Racing Parts and Accessories Catalog

Boost Control Replacement Bulbs And Sockets
Compact, 2-1/2” diameter controller Part No. Description
provides full, effective boost control, ATM3211 For All Steel Case 2-5/8" Gauges And Tachs
maximizing performance, while prevent- ATM3219 Twist-In For Some Pro-Comp And Sport-Comp Gauges
ing catastrophic engine damage due to ATM3220 For All Plastic Case That Use Twist-In Light Socket
excessive boost. Digital controller in- LED Replacement Bulb Kits
cludes high/low boost modes, perfect for
dual purpose, street/strip vehicles, while ATM2681 Upgrade standard gauge lighting to bright LED illumination.
including the ability to control boost by Compatible with all Auto Meter gauges (except Auto Gauge),
RPM and by gear. Unit also includes peak boost recall, configu- speedometers and most in-dash tachometers.
rable warnings with overboost protection, pro control input and Part No. Description
Red
output, and a data logger output. Controller is easily programmed ATM3284 Green
ATM3285
right through the gauge, eliminating the need for a laptop. Sold ATM3286 Blue
complete with electronic boost control solenoid, sensor and wir-
ing harness. Temperature And Pressure
Part No. Description Adapter Fittings ATM2263
ATM2681 ES Hard-to-find fittings for use with Auto Meter
ATM3381 Sport-Comp
ATM4381 Ultra-Lite mechanical oil, water and transmission temperature
ATM6181 Cobalt or pressure gauges. Extension adapters are also available where
extra water passage clearance is needed.
Part No.
Description
Ultra-Lite Peak/Warn Gauges ATM2261 Weld-in Adapter, All Mech. Trans. And Temp. Gauges
Aluminum Ultra-Lite gauges with Peak ATM2263 3/8" Brass NPT Adapter
Memory and Warn functions can display ATM2264 1/2" Brass NPT Adapter
highest pressure/temperature from last ATM2265 1/8" NPT to M10 x 1 Adapter
run and warn driver of pre-set pressure/ ATM2267 M14 x 1.5 To 1/8” NPT Female, Temperature/Pressure Adapter
M16 x 1.5 To 1/8" NPT Female, Pressure Adapter
temperature drops or rises using a bright ATM2268 1/8” BSPT Male To 1/8” NPT Female, Temperature/Pressure Adapter
ATM2269
red LED. Aluminum gauges have satin ATM2270 1/2" NPT Temperature Extension
dial faces and fluorescent red pointers for ATM2271 3/8" NPT Temperature Extension
quick, easy reading. Installation hardware ATM2272 3/8" NPT Red Aluminum Adapter
and 12 volt lighting are included. ATM4383 ATM2273 1/2" NPT Red Aluminum Adapter
ATM2277 M12 x 1.5 To 1/8" NPT Female, Temperature/Pressure Adapter
Description 2-1/16" Dia. Gauge 2-5/8" Dia. Gauge ATM2278 M12 x 1.75 To 1/8” NPT Female, Temperature/Pressure Adapter
Fuel Pressure, 0-15 PSI — ATM4470 ATM2286 Temperature Manifold, Fits 3/8" OD Tubing
Voltmeter, 8-18 Volts ATM4383 ATM4483
Oil Pressure, 0-100 PSI ATM4352 ATM4452
Oil Temperature, 100°-340°F ATM4340 ATM4440 Braided Stainless Steel
Water Temperature, 100°-260°F ATM4354 ATM4454 And Copper Gauge Tubing
Tubing for all gauge series.
Pro Wide Band Air/Fuel Ratio Gauges Part No. Description
Maximize engine tuning and performance, prevent lean out and ATM3224 6' Copper, 1/8" Dia., Mech. Pressure Gauge
detonation by closely monitoring air/fuel ratio. Ideal for carb or EFI ATM3227 3' Braided Stainless -4AN, 3/16" ID Mech. Pressure Gauge
6' Braided Stainless -4AN, 3/16" ID Mech. Pressure Gauge
ATM3228
applications, compact, 2-1/16" diameter ATM3229 4' Braided Stainless -4AN, 3/16" ID Mech. Pressure Gauge
gauges have easily read digital, LED ra-
dial displays and peak recall for leanest Right Angle Gauge Fitting ATM3278
wide open throttle mixture. Right angle fitting adapts Auto Meter mechanical
Part No. Description pressure or vacuum gauges with an 1/8" NPT port
ATM5778 Phantom to -4AN braided stainless steel line.
ATM5978 ES
ATM7178 C2 High Pressure Gauge Isolator ATM5282
ATM7378 NV
ATM3378 Isolator is compatible with gasoline, oil
or anti-freeze and may be used with any
mechanical pressure gauge mounted in the
driver's compartment. Rated at 200 PSI
of working pressure. Not for use with alcohol fuels. A 4' length of
braided hose is included.
Replacement Senders
Designed for replacement purposes, senders fit
Auto Meter temperature or pressure gauges.
Part No. Description
ATM2242 100 PSI Electric Oil Pressure Gauges
ATM2246 Full Sweep 100 PSI Oil/Fuel, 1/8” NPT
ATM2252 Full Sweep Electric Temperature Sender, 1/8" NPT
ATM2258 Short Sweep Electric Water Temp. Gauges, 250°F, 300°F and 340°F
ATM2259 Electric Cyl. Head Temperature Gauges, 340°F, Shallow Depth Mounting
PAUL STEWART MATT HAUCH
145