Page 301 - 2018 Racecar Engineering Drag Racing Parts and Accessories Catalog

Go System Fuel Command Center FIT40003 Throttle Return Spring
Utilizes a sump tank that mounts in your engine FIT60011
compartment. Use your existing fuel pump (low This kit includes a bracket that
pressure electric or engine driven carbureted) to bolts to the throttle body and pro-
deliver fuel to the sump where a 340 LPH high vides a throttle return spring. Note
pressure fuel pump is submerged in fuel. This style that this kit only fits the FiTech 4-BBL
pump runs cooler and is quieter than external throttle bodies.
inline pumps.
Oxygen Sensor Bung Kit
Inline External Fuel Delivery Kit FIT40005 FIT60012
Fuel Delivery Kit includes a 255
LPH inline external fuel pump
suitable for use with an engine
making up to 600 HP. The kit also 340 L/PH In-Tank Fuel Pump
includes 25 feet of high quality EFI FIT40102
grade fuel hose suitable for both This high quality in-tank fuel pump is a
inlet and return lines to the fuel replacement for the fuel pump that is used
tank. An EFI grade fuel filter and all necessary fittings and hose in the Fuel Command Centers (40003).
ends are also included in the Inline External Fuel Delivery Kit.
255 L/PH Inline Frame Mount
Fuel Pressure Gauge 0-100 PSI Fuel Pump FIT40101
FIT80115 This quality EFI fuel pump is a replacement
This high quality fuel pressure gauge is avail- for the pump that is used in the FiTech Inline
able in 0 to 100 PSI (EFI). It has a 1/8"NPT male fuel pump kit, FIT40005.
fitting on the back ready to thread
into any 1/8"NPT port.
Billet Fuel Filter FIT80111
Fuel Pressure Gauge 0-15 PSI 100 micron pre-filter with ORB-10
FIT80116 inlet threads mounts between tank and
pump. These are the same filters provided
This high quality fuel pressure gauge is avail- in the FiTech Frame Mount Fuel Delivery Kit
able in 0-15 (carburetor). It has a 1/8"NPT male (#40005) and are very high quality filters designed
fitting on the back ready to thread into any specifically for use in modern EFI systems.
1/8"NPT port.
Billet Fuel Filter FIT80112
Gasket Kit FIT60001 30 micron pre-filter with -6AN male threads
Included are 4150 and 4500 mounts between pump and EFI throttle body.
gaskets for between the throttle body These are the same filters provided in the FiTech
and intake manifold along with an air Frame Mount Fuel Delivery Kit (#40005) and are very
cleaner gasket. high quality filters designed specifically for use in modern EFI
systems.

1979-93 Ford Mustang
Manual Rack And Pinion

Manual Rack And Pinion Steering Units
Eliminate salvage yard searches for rebuildable rack and pinion A direct bolt-in replacement for 1979-93 Mustang. Ideal for the
units. Units are completely new, not remanufactured, with either enthusiast who wishes to drop over 30 lbs. of front end weight,
polished or chrome plated housings. eliminate the horsepower-robbing power steering pump and
convert to manual steering. High quality aluminum casting has
1971-72 Ford Pinto two mounting holes and a chrome plated center tube. Complete
unit weighs just 14 lbs. Steering ratio is 20:1 and has 3.75 turns
Manual Rack And Pinion lock-to-lock. Outer ends and shaft kit (or adapter) required for
installation. Unit may be purchased separately, or as a kit. Deluxe
kit includes rack and pinion, needle bearing u-joint, shaft kit,
A completely new unit to meet the needs of drag racing chas- manual tie rod ends and two-piece mounting bushings.
sis builders. Dimensionally identical to the 1971-72 Pinto unit. Part No. Description
Manual Rack And Pinion Unit
Durable, lightweight aluminum casting has a chrome plated center FLAFR1503 Manual Rack And Pinion Unit, 15:1 Ratio, 25% Faster Than
tube. Weighs just 12 lbs., with 3.75 turns lock-to-lock. FLAFR1520 FLAFR1503
Part No. Description FLAFR1890 Manual Rack And Pinion Unit With Deluxe Installation Kit
FLAFR1501 Manual Rack And Pinion Unit Accessories
FLAFR1501-2 Manual Rack And Pinion Unit, 5" Shortened FLAFR1603 Outer Tie Rod Ends, Each (2 Required)

299