Page 96 - 2018 Racecar Engineering Drag Racing Parts and Accessories Catalog

TRANSMISSION COMPONENTS

Transmission ALL26700 Flywheel Locking Tool
Coolers SB/BB Chevy ALL96426
Universal coolers reduce Place flywheel locking tool onto rear block dowel
operating temperature of pins to prevent the flywheel from turning while
the fluid, extend life of the tightening or loosening balancer bolts, flywheel bolts, clutch/
transmission and provide pressure plate bolts or cam gear bolts. Locking tool works with
better performance. Use 153- or 168-tooth flywheels and flexplates.
as a stand alone cooler
or as an auxiliary unit to
increase cooling capacity Balancing Plate ALL26120
of a stock system. Increased cooling is recommended when Install between crankshaft flange and
using a high stall converter, or if the vehicle is used for towing. flexplate to use a Chevy 350 flexplate
Choose from universal coolers with 3/8" barbed fittings, rubber or flywheel with a 400 crank.
hose, clamps and mounting kit, or -6AN coolers with standard
-6AN male fittings and mounting kit.
Pilot Bushing Install Tool
Part No. Overall Size Core Size GVW
Coolers With 3/8" Barbed Fittings ALL26115
ALL26700 12" x 5" 9" x 5" 10,000 Lb Driver simplifies installation of pilot bushings or bearings for
ALL26702 15" x 5" 12" x 5" 12,000 Lb manual transmissions including Muncie, Saginaw, BorgWarner,
ALL26704 12" x 7.5" 9" x 7.5" 16,000 Lb T-10 and many other popular transmissions with .590" pilot
ALL26706 15" x 7.5" 12" x 7.5" 18,000 Lb shafts.
ALL26708 16" x 10" 12" x 10" 20,000 Lb
ALL26709 20" x 10" 17" x 10" 26,000 Lb
Coolers With -6AN Fittings Extended Length Pilot Bushings
ALL26711 12" x 5" 9" x 5" 10,000 Lb Use these extra long bushings when
ALL26712 15" x 5" 12" x 5" 12,000 Lb distance between engine and bellhous-
ALL26714 12" x 7.5" 9" x 7.5" 16,000 Lb ing has increased due to use of mid-
ALL26716 15" x 7.5" 12" x 7.5" 18,000 Lb plates, rear motor mounts or adapters.
ALL26718 20" x 7.5" 17" x 7.5" 20,000 Lb Bushings help maintain true alignment ALL26112 ALL26114
ALL26719 20" x 10" 17" x 10" 26,000 Lb
of clutch disc to flywheel.
Description
Part No.
Locking Transmission Dipsticks ALL26112 Bronze Bushing
Dipsticks feature a positive lock to keep dipstick ‡ Steel Roller Bearing Bushing
in place and seal tight to prevent fluid leaks while ALL26114 (has a machined in roller bearing to reduce friction and wear.)
sealing out moisture and debris. Steel case fill tubes ‡ Bearing is shipped dry. Apply a good quality, high-temp grease upon
have a gold finish, include a welded-on mounting tab installation.
and are fitted with a rubber grommet type seal which
reduces the risk of leaks common with traditional
O-ring seals. Locking dipstick tubes are required on Clutch Alignment Tools
10.99 and faster drag cars. Splined, high-impact plastic
Part No. Description tools are helpful when aligning the
Powerglide clutch disc on the flywheel for proper insertion of the transmis-
ALL69100 Chevy Car sion input shaft.
ALL69102 Chevy Dragster Part No. Description
ALL69104 Chevy Altered ALL14290 1-1/8" Diameter, 10-Spline
ALL69107 Dedenbear Car ALL14292 1-1/8" Diameter, 26-Spline
ALL69108 Dedenbear Dragster
Turbo-Hydramatic 350
ALL69110 Chevy
ALL69111 Buick, Olds, Pontiac
Turbo-Hydramatic 400
ALL69112 Chevy
ALL69113 Buick, Olds, Pontiac
Chevy (Other)
ALL69116 Chevy 200-4R
ALL69117 Chevy 700R4
ALL69118 Chevy/GMC 4L80-E
Chrysler Torqueflite
ALL69120 727 Small Block
ALL69121 727 Big Block
ALL69124 904
Ford
ALL69126 Ford C-4 Case Fill
ALL69127 Ford C-4 Pan Fill
ALL69128 Ford C-6 Small Block
ALL69129 Ford C-6 Big Block
ALL69130 Ford AOD
TERRY McMILLEN • SCOTT WAHLSTROM MATT HAUCH
94