Page 12 - 2019 Allstar Performance Parts and Equipment Catalog

AIR CLEANERS & ACCESSORIES

Filter Cleaning Station Carb Hats
ALL26009 Carburetor hats are ideal
Filter cleaning station simplifies and speeds to cover open carbs and
up the process of servicing 14" washable air prevent debris from falling
filters. Spray air filter with a cleaner/ into the engine while working ALL26040 ALL26042
degreaser as recommended by filter manu- in garage or pit area while the air
facturer. Allow a brief time to soak and cleaner is removed. 2-1/2" tall
then flush clean with a garden hose. carb hats are designed to fit
Allow filter to dry completely then apply an even most carbs or throttle bodies
application of filter oil, if applicable. For use with wash- with a 5-1/8" diameter neck.
able filter elements only. ALL26040 ..... Plastic Carb Hat ALL26043 ALL26044
ALL26042 ..... Plastic Carb Hat With Screen, Use When
Adjusting Valves
ALL26043 ..... Aluminum Carb Hat, Standard Spun Aluminum
Air Filter Cleaner ALL78222 ALL26044 .... Aluminum Carb Hat, Deluxe Machined
Aluminum With Sealing O-Ring
Spray solution directly onto dirty air filter. Allow
Note: Hats will not clear choke linkage or shaft on Holley style carbs but will clear
a brief time to soak, 5-10 minutes then rinse choke horn with choke linkage and shaft removed.
clean with water. For use with Allstar washable
air filter elements. Plastic 24 oz. bottle.
Dominator Carb Hat ALL26041
Plastic carb hat is 2-3/8" tall and fits over
Breathers the 7-1/4" air cleaner opening of Holley
Shielded or non-shielded clamp-on Dominator carburetors to prevent water
breathers will fit valve cover tubes. or debris from entering the engine. Solid
ALL36202 ..... Non-Shielded Breather, cover may be drilled when an air cleaner
1-1/2" stud is used.
ALL36203 ..... Shielded Breather, 1-1/2"
ALL36204 ..... Non-Shielded Breather, 1-3/8" Sprint Car Wash Plug Set
ALL36205 ..... Shielded Breather, 1-3/8"
Aluminum plugs have O-rings for a
Breather Sock ALL36208 watertight seal and will keep dirt out
of injectors while cleaning sprint car.
The breather sock fits over standard 3"
diameter, 2-1/2" tall valve cover breathers 4-piece set comes with a nylon storage
to help catch residual oil discharged from pouch.
the engine through valve cover breathers. ALL26072
A practical alternative to wrapping dirty Part No. Size Wash Plug Dia. Stack Dia.
shop rags around valve cover breathers! Kinsler
Socks are easily cleaned with a mild detergent. ALL26072 2-1/4" 2.328" 2.335"
ALL26073 2-11/16" 2.762" 2.790"
Breather Filters ALL26074 2-3/4" 2.848" 2.875"
ALL26075 2-13/16" 2.921" 2.950"
Mesh filters add another layer of protection ALL26076 2.90" 2.973" 3.00"
against dirt, dust and debris. Fits 3" diam- Engler
eter breathers typically used on valve covers, ALL26033 2-1/2" 2.632" 2.650"
breather tanks and helmet systems. ALL26035 2-13/16" 2.885" 2.905"
ALL26227 ..... Fits Non-Shielded Breathers ALL26036 2.90" 2.973" 3.00"
ALL26228 ..... Fits Shielded Breathers ALL26038 3" 3.073" 3.10"
Hilborn
Related Parts ALL26032 2-7/16" 2.483" 2.50"
ALL36202 ..... Non-Shielded Breather, 1-1/2"
ALL36203 ..... Shielded Breather, 1-1/2" Air Pans
ALL36204 ..... Non-Shielded Breather, 1-3/8"
ALL36205 ..... Shielded Breather, 1-3/8" Lightweight aluminum air pans
fit between the carburetor and
Breather Cover ALL26232 cowl area to keep engine heat away
from and direct cool air to the carburetor.
Water-repellent cover fits 3" diameter ALL26100
breathers commonly found on valve covers, Cooler intake air means extra horse-
breather tanks and helmet systems. Cover power. Carb mounting flange is
with drawstring fits both shielded and non- uncut.
shielded breathers. ALL26100 ..... Stepped Plenum
ALL26101 ..... Flat Plenum ALL26101

10 www.allstarperformance.com