Page 149 - 2019 Allstar Performance Parts and Equipment Catalog

Ford 9" U-Joints
Pinion Support ALL68396 Performance U-joints are greasable
“Daytona” forged aluminum pinion and fit a variety of driveshaft
support replaces original equipment combinations.
cast iron support. Support is furnished 1310 Series: 3.218" Wide with 1.062" Diameter Caps REAR ENDS & AXLES
with races installed and is for use with 1330 Series: 3.622" Wide with 1.062" Diameter Caps
28-spline pinion gears. 1350 Series: 3.622" Wide with 1.187" Diameter Caps
U-Joints With Same Cross Width
Pinion Seals ALL69030 ..... 1310 Series
Replace leaking or damaged seals ALL69031 ..... 1330 Series
in most popular differentials. ALL69032 ..... 1350 Series
ALL72145 ..... Quick Change 5/16" Wide U-Joints With Different Cross Widths
ALL72144 ..... Quick Change 1/2" Wide ALL69034 ..... 1310 to 1330
ALL72143 ..... Quick Change 3/4" Wide ALL69037* ... 1310 to 1330 NEW! Width = B, Caps = A
ALL72146 ..... Ford 9" Standard, 28-Spline, 3" O.D. ALL69035 ..... 1310 to 1350
ALL72147 ..... 7.5" GM ALL69036 ..... 1330 to 1350
ALL72148 ..... 8.5" GM *Standard 1330 spread with larger 1.125" diameter caps.

Ford 9" Pinion Yokes
Forged steel or billet aluminum Allstar U-Bolt Kits
Pinion Yokes are available for Ford 9".
U-bolt kits for 1310,
ALL68380 ..... 28-Spline Steel Pinion Yoke, 1330 and 1350 series
Use With 1350 (3-5/8") U-Joint
ALL68382 ..... 35-Spline Steel Pinion Yoke, U-joints secure drive-
Use With 1350 (3-5/8") U-Joint shaft to pinion yoke. Sold
ALL68384 ..... 28-Spline Aluminum Pinion Yoke, in pairs with nuts and lock washers.
Use With 1310 (3-1/4") U-Joint
U-Joint Stud CTC
U-Bolt Series Cap Thread “A” “B”
Pinion Nuts Std. ALL69015 1310/1330 1-1/16" 5/16"-24 1-3/4" 1.400"
Replace original worn or damaged nuts X-Long ALL69017 1310/1330 1-1/16" 5/16"-24 2" 1.400"
each time a gear set is changed. Nut secures Std. ALL69018 1330 † 1-1/8" 5/16"-24 1-7/8" 1.575"
driveshaft yoke to pinion gear. Std. ALL69016 1350 1-3/16" 3/8"-24 2" 1.625"
† 1330 with big caps (1.125")
ALL72155 ..... Ford 8.8" And Standard 9"
ALL72156 ..... GM 7.5 And 8.5

Pinion Yoke Wrench GM U-Joint Strap Kit
ALL68372 ALL69014
Wrench fastens to most popular Replacement O.E. style U-joint
pinion flanges and companion flanges strap kit fits popular GM pinion
to hold when setting bearing pre- yokes including 7.5", 8.2", 8.5" 10-bolt
load and tightening retaining bolt or and other popular rear ends. Kit is designed
nut. Wrench has provisions to work with for 1-1/8" (1.125") diameter caps and includes (2)
1/2" or 3/4" drive tool. Center hole is 2" to clear most 5/8" wide steel straps with 1-7/8" CTC holes and (4)
sockets. Universal slotted bolt patterns for 1/4", 5/16" and 1-1/2" long 5/16"-24 grade eight bolts.
3/8" fasteners for most AMC, Dana, Ford and GM yokes.

Ford 9"
U-Joint Girdle Kit
ALL69025
Aluminum U-joint NEW!
girdles replace standard
steel U-bolts and provide more
surface clamping area for 1310 and 1330 (1-1/16") U-joint
caps. Girdle design helps prevent over-tightening and
includes mounting hardware.

Hudson O’Neal Photo: Mark Schafer
www.allstarperformance.com 147