Page 160 - 2019 Allstar Performance Parts and Equipment Catalog

SPRINT CAR COMPONENTS

Polished Round Heating Pads
Dry Sump Tanks High temperature ALL76422
Aluminum 6" tanks feature silicone heating pads
a highly polished finish and externally preheat oil in wet sump oil pans, dry sump
a completely removable top tanks and automatic transmission pans reducing overall
to enable thorough cleaning. warm up time and improving lubrication during initial
Three internal baffles are start up. 3" cord, 120-volt operation.
fastened to the top for easy ALL76420 ..... 2"x15", Self Adhesive Pad, 200W
removal and cleaning. All tanks ALL76422 ..... 5"x7", Self Adhesive Pad, 375W
have two 3/8"NPT female ALL76424 ..... 6"x12", Velcro Strapped Pad For 6" O.D. Tanks, 435W
ports on the top cover for vent ALL36101 WARNING! Do not plug heater in without being installed
lines or return lines and a 3/8" ALL36095 on tank or metallic surface to absorb heat. Element heats
female NPT bottom port for easy draining. Tanks feature a up quickly and damage will result.
-16AN return fitting (upper) and a 3/4"NPT female supply
fitting (lower). Mounting brackets must be purchased Immersion Heaters
separately.
Immersion style heater preheats oil
ALL36101 ..... 16" Tall, 6 Qts.* in wet sump oil pan or dry sump
ALL36102 ..... 18" Tall, 7 Qts.* tanks to reduce overall warm up time
Replacement Part and improve lubrication during initial start up.
ALL36124 ..... Cap ALL36124 5/8" diameter stainless steel sleeve inserts into pan or tank
*Capacity listed is fluid filled to approximately 4" from top of tank. and secures with a welded on 1/2"NPT brass screw-in fit-
Note: 1" of tank height equals approximately 1/2 quart of fluid. ting. 120-volt operation.
ALL76415 ..... 4-3/4" Long Heater Element w/3' Long Cord, 400 W
Sprint Car Dry Sump Tank ALL76416 ..... 7-1/2" Long Heater Element w/12" Long Cord, 250 W
Mounting Brackets ALL36092 WARNING! Do not plug heater in without being installed
Mounting brackets are designed to mount in tank and submersed in liquid, element heats up quickly
6" diameter tanks to the left front and damage will result.
corner of standard small block Chevy ALL36093
engines. Commonly mounted with Sprint Car Wash Plug Set
ALL38145 sprint motor plate, the upper
bracket utilizes the water pump mounting holes and the Aluminum plugs have O-rings for
lower bracket fastens to the early front engine mount a watertight seal and will keep dirt
mounting hole. out of injectors while cleaning sprint
car. 4-piece set comes with a nylon
ALL36092 ..... Upper Tank Mount storage pouch.
ALL36093 ..... Lower Tank Mount
ALL26072
Fuel Pressure Gauge ALL40330 Part No. Size Wash Plug Dia. Stack Dia.
Kinsler
Fuel pressure indicator gauge allows pre- ALL26072 2-1/4" 2.328" 2.335"
adjustment of the high speed secondary ALL26073 2-11/16" 2.762" 2.790"
and main valve opening pressures using ALL26074 2-3/4" 2.848" 2.875"
a compressed air source. Gauge can be ALL26075 2-13/16" 2.921" 2.950"
mounted directly to the wall or tool ALL26076 2.90" 2.973" 3.00"
box. 4-1/2" diameter dial has a 0-160 Engler
PSI range. ALL26033 2-1/2" 2.632" 2.650"
ALL26035 2-13/16" 2.885" 2.905"
ALL26036 2.90" 2.973" 3.00"
ALL26038 3" 3.073" 3.10"
Hilborn
ALL26032 2-7/16" 2.483" 2.50"
Compact
Electric Fuel Pump
ALL40320
High flow, low pressure electric
fuel pump equipped with a 5/16" inlet/
outlet. The pump flows 18 gph at 4.0 psi, 5.5 psi max-
imum. Includes a rubber padded mounting bracket and
two heavy duty hose clamps. Rated 12V/5 amps. Overall
length is 5-1/2" x 1-1/2" wide.
Tyler Courtney Photo: JohnnyB Imagery
158 www.allstarperformance.com