Page 155 - 2019 Allstar Performance Parts and Equipment Catalog

Inside Air Blower Motor Helmet Blower System ALL13020
ALL13000 Remote mount breather system directs filtered, forced air
Inside air unit is commonly mounted to the driver’s helmet for added comfort and safety. Motor
inside the cockpit or decking to pro- assembly has a mounting bracket for easy mounting to chassis
vide forced, filtered air to the driver for or seat back. 4 ft. helmet hose connects to most helmet fresh
cooling and to help prevent shield fogging. air intakes with standard 1-1/4" connector. The
Spun aluminum cover prevents damage to filter 9 ft. extension lead can be easily connected
assembly. Motor has two speeds and is recommended for to a switched 12-16 volt source. This system SAFETY/DRIVER EQUIPMENT
12 volt systems. weighs 2-1/4 lbs, and draws 3.5 amps at
13.6 volts, and produces about 90 CFM
Replacement Parts of air to the driver, providing more than
ALL13014 ...... Filter enough air to keep the driver cool and
ALL99022 ..... Top shield clear.
Outside Air Blower Motor Replacement Parts
ALL36202 ..... Filter
ALL13001
ALL36203 ..... Filter With Shield
Outside air unit is commonly mounted inside ALL99021 ..... Wire Harness
the driver compartment on vehicles with win-
dows or closed compartment to provide forced, filtered Mini Helmet Air System ALL13012
air to the driver for cooling and to help prevent shield Self-contained, 12-volt fan
fogging. Intake top can be used with 1-1/4" helmet hose with reusable filter moves
or trimmed to accept larger 3" hose, such as ALL42150, approximately 40-60 CFM
routed to the motor from outside of the car or fastened of air depending on system
to a plastic duct, such as ALL42143, for fresh air. Motor voltage. An RF connector
has two speeds and is recommended for 12 volt systems. allows easy, unrestricted
Replacement Parts helmet removal. A 14" wire
ALL13014 ...... Filter is permanently attached to
ALL99023 ..... Top the fan and accepts the 24" pigtail (included). Pigtail has
simple red (+) and black (-) wire hook-ups.
Helmet Fan ALL13011
Compact inline blower fan connects Hose Adapter ALL13007
to 1-1/4" helmet hose and forces air Adapter fits most helmet hoses with 1-1/4"
inside driver’s helmets equipped with an air inlet ends and has a 2-3/4" O.D. to fit inside
to help prevent shield fogging and provide air 3" duct style hose or inside some NACA ducts. Adapter
movement. Fan produces 20+ cfm of air flow when used may also be mounted in a window opening to funnel air
on a 12V system, drawing only 1.3 amps. Two wire pigtail directly to the driver via helmet hose.
easily connects to a switched 12V power source and a
suitable chassis ground.
Allstar Race Suit
The Allstar Performance Nomex
Helmet Vent Hose
race suit has style, comfort and is
Hose is 4' long and used to complete affordable! Suit is 1-piece double
the connection between a driver air layer, box quilted and SFI 3.2A/5
system and helmets equipped with certified. Features include: side
a 1-1/4" barbed intake port. Two pockets, an adjustable belt, elastic
styles are available: ALL13004 wrist cuffs, hidden ankle cuffs,
is gray and constructed from elastic back panel, adjustable neck
a denser material to resist strap, a sturdy waist length zipper
crushing and abrasions from rocks and debris; and a black nylon storage bag.
ALL13021 is black and constructed of a thinner ALL99850 ..... Medium
more pliable material which is less restrictive to the driver. ALL99851 ..... Large
ALL13004 ..... Gray ALL99849 ..... X-Large (Short) NEW!
ALL13021 ..... Black ALL99852 ..... X-Large
ALL99853 ..... XX-Large
Helmet Vent ALL13025 ALL99862* ... Custom Size
High-impact, screened ABS vent minimizes *Completion of an Allstar
the chance of rocks and other debris from custom racing suit order form
is required. Custom racing suits
entering helmet hose. Vent has a 1/2" wide are available in red, blue or black.
mounting flange and a centered outlet that Scan for the Custom Racing Suit order form.
accepts most 1-1/4" helmet hoses.
www.allstarperformance.com 153