Page 280 - 2017 Racecar Engineering Circle Track Parts and Accessories Catalog
P. 280

BR BREAK-IN OIL                                    SHX SHOCK FLUID
                 Petroleum-based oil has superior break-in properties,   SHX incorporates next generation shock fluid technology
               particularly in flat tappet engines. Lubricant promotes ring   to help provide consistent, fade-free performance. Formula
               seal and protects camshaft and lifters with the highest levels   includes a proprietary additive package that reduces seal
               of zinc and phosphorus. Offered in BR30 (SAE 5W-30), BR40   drag, improves air release and maintains viscosity under
               (SAE 10W-40) and BR50 (SAE 15W-50) formulas.       extreme heat and high loads. Engineered to outperform
                         1 Qt. Bottle  (12) 1 Qt. Bottles  2.5 Gallon Jug  (2) 2.5 Gallon Jugs  conventional shock oils, SHX is suited to a wide variety of
                Description  Part No.  Part No.  Part No.  Part No.  race vehicles.
                  BR30  JGP01806  JGP01807    –          –         1 Quart Bottle   (12) 1 Qt. Bottles
                  BR40  JGP03706  JGP03707    –          –          Part No.  Part No.
                  BR50  JGP00106  JGP00107  JGP00114   JGP00115    JGP50040  JGP50041
                                                                  COOLING SYSTEM PROTECTOR
                                                                   Impurities in well water can cause rust and corrosion inside the
                                                                  radiator, block, water pump and cylinder heads which can lead
               MANUAL TRANSMISSION FLUID                          to a loss of cooling system efficiency. Cooling System Protec-
               JGP01206                                           tor stops the adverse effects of hard water on these critical
                 Full synthetic fluid meets the demands of modern manual   components.
               racing transmissions. MTF helps lower operating tempera-  1 Quart Bottle   (12) 1 Qt. Bottles
                                                                              Part No.
                                                                    Part No.
               tures, reduce parasitic drag and improve shifting   JGP50030  JGP50031
                1 Quart Bottle   (12) 1 Qt. Bottles
                  Part No.  Part No.
                 JGP01206  JGP01207                               EXTREME PRESSURE GREASE
                                                                   Premium Extreme Pressure Grease features improved
                                                                  resistance to high temperatures and increased
                                                                  load carrying ability when compared to traditional
                                                                  lithium grease. EPG is suited to any application that requires a NLGI #2 grease.
                                                                  Sold in 4 oz. tubes, or in cases.
               SYNTHETIC GEAR OIL                                   4 Oz. Tube  (6) 4 Oz. Tubes
                 Formulated for differentials and manual transmissions, Synthet-  Part No.  Part No.
               ic Gear Oil reduces operating temperatures by up to 15°F. Offered   JGP00738  JGP00739
               in Racing 75W-85 or 75W-110, and Qualifying 70W-80 formulas.
                         1 Quart Bottle  (12) 1 Quart Bottles  5 Gallon Pail  EXTREME PRESSURE CHASSIS GREASE
                 Description  Part No.  Part No.  Part No.        JGP70030
                  Racing   JGP00630  JGP00631  JGP00617
                 75W-110                                           A premium extreme pressure grease with
                 Racing                                           excellent load carrying ability. Designed for
                 75W-85  JGP00830   JGP00831      –               high temperature and high loads. Provides
                                                                  exceptional mechanical stability in a NLGI #2
                                                                  grease. Sold in 400gm cartridge.

                                                                  SPLINE GREASE JGP70070
                                                                   Ideally suited to cambered rear housing axles and drive
               BREAK-IN GEAR OIL                                  plates, Spline Grease is designed to extend the durability
                 Specialized lubricant allows gear teeth to break-in quickly   of high speed sliding spline teeth in racing applications.
               and effectively, while providing improvements in surface finish.   High viscosity, synthetic base grease provides increased thermal stability and
               Break-In Gear Oil polishes the gear teeth, eliminating micro-  oxidation resistance, while Moly fortification delivers protection from wear.
               pitting and improving durability. Lubricant may be run for the   Sold in a 1/2 lb. tub.
               normal break-in cycle and then replaced with a synthetic racing
               gear oil for maximum protection and performance. Viscosity   SPEED SHIELD
               typical of 80W-90.                                  Ideal for dirt racing applications, Speed Shield helps save time and
                1 Quart Bottle   (12) 1 Qt. Bottles               ease post race clean-ups. After washing, simply spray-on Speed
                  Part No.  Part No.                              Shield to help remove the remaining dirt and mud. Product produces
                 JGP02330  JGP02331
                                                                  a shine, which is neither wet nor oily, and helps prevent mud or dirt
                                                                  from sticking to surfaces. Works great on plastic, paint, decals or
                                                                  fiberglass. Sold in 12 oz. can, or in cases.
                                                                    12 Oz. Can  (12) 12 Oz. Cans
                                                                    Part No.  Part No.
               POWER STEERING FLUID                                JGP50070  JGP50071
                 A full synthetic formula with exceptional high temperature   SPEED LUBE
               foam resistance. Fluid helps reduce temperatures and resists   Powerful and penetrating, Speed Lube is a spray-on
               foaming.
                                                                  lubricant that is well suited to heim joints, bearings, link-
                1 Quart Bottle   (12) 1 Qt. Bottles               ages and chains. Specially formulated with a proprietary
                  Part No.  Part No.
                 JGP01306  JGP01307                               additive package, product offers maximum penetration,
                                                                  lubrication and corrosion protection. Sold in 8 oz. can, or
                                                                  in cases.
                                                                    8 Oz. Can  (12) 8 Oz. Cans
                                                                    Part No.  Part No.
                                                                   JGP50090  JGP50091
                                                                                                              279
   275   276   277   278   279   280   281   282   283   284   285