Page 404 - 2017 Racecar Engineering Circle Track Parts and Accessories Catalog

WATER OUTLET FITTINGS WELD FITTINGS/BUNGS
Billet aluminum construction water outlets Ideal for welding to valve covers, dry sump tanks, breather tanks, etc. Sold
include O-rings for sealing. Choose from individually.
standard or ported water outlets, complete
with (2) 3/8" NPT ports for additional wa- ter
lines. Fits Chevy V-8’s.
Part No. Description Male AN Female AN
-16 Water Outlet, Includes (2) Part No. Description Description Part No. Part No.
JOE36000 Aluminum Aluminum
3/8" NPT Ports
JOE36050 -16 Water Outlet Female NPT Weld Bungs AN Weld Fittings
JOE36060 -20 Water Outlet JOE37102 1/8" NPT -3AN JOE37003 –
JOE37104 1/4" NPT -4AN JOE37004 –
THERMOSPACER JOE36025 JOE37106 3/8" NPT -6AN JOE37006 JOE37306
JOE37008
JOE37308
-8AN
JOE37108
1/2" NPT
Aluminum spacer allows plumbing additional lines for JOE37110 3/4" NPT -10AN JOE37010 JOE37310
improved cooling. Uses an O-ring for sealing, and has JOE37112 1" NPT -12AN JOE37012 JOE37312
three 1/2" NPT ports and one temperature sending unit JOE37114 1-1/4" NPT -16AN JOE37016 JOE37316
port. Fits Chevy V-8’s. -20AN JOE37020 –
REDUCER CLAMPS
Ideal when relocating a radio box, coil clamp, etc. to smaller diameter tubing.
CAP AND WELD Made from lightweight aluminum.
BUNG ASSEMBLY JOE37402 Part No. Description
Easy to grip with an O-ring seal, assembly is made JOE13000 1-3/4" To 1-1/4"
from 6061-T6 aluminum and provides a 2" opening. Well JOE13001 1-3/4" To 1-3/8"
suited for oil, water or fuel tanks. Welding required. JOE13002 1-3/4" to 1-1/2"
JOE13003 1-3/4" To 1-5/8"
CLAMP-ON ENGINE MOUNT SPACERS
Lightweight billet aluminum spacers eliminate
RADIATOR BRACKETS the need for using stacks of heavy steel washers.
Brackets locate radiator side-to-side and the Sold per pair.
top clamp unbolts for quick radiator removal. Part No. Description
Includes provision for air box attachment. No JOE10966 1/2" Thick Spacers
welding necessary. JOE10968 1" Thick Spacers
Part No. Description JOE10978 2" Thick Spacers
JOE36501 1-1/4" Clamp-On Brackets
JOE36502 1-1/2" Clamp-On Brackets
JOE36504 1-3/4" Clamp-On Brackets THROTTLE PEDAL ASSEMBLY
Replacement Pedal assembly offers comfort and adjustability with a link-
JOE36509 Radiator Core Retainer age block that acts as a side foot rest which may be adjusted
to suit the linkage. Includes return spring and two adjustable
RADIATOR OVERFLOW FITTINGS stops, one for full throttle and one for return. Throttle pull back
Special fittings, which are designed in a body panel outside may be purchased separately.
the driver’s compartment, signal the driver in the event of Part No. Description
overheating when the cooling system expels water. JOE33600 Throttle Pedal Assembly
Part No. Description JOE33620 Throttle Pull Back Only
JOE34375 Radiator Overflow Fitting, -4AN JOE34376 JOE33700 Throttle Cross Shaft Bell Crank
JOE34376 Radiator Overflow Fitting, Barbed Assembly
JOE33720 Throttle Pedal, Bell Crank And
Linkage Assembly

DRY SUMP BREATHER TANK AIR CLEANER STUD KIT JOE34306
JOE12402 Stainless steel 5/16"-18 stud will not break like mild steel units.
Full fabricated aluminum tank acts as a vent for dry sump Tapered nut improves air flow to the carb, while the air cleaner nut
and the compact 3" x 3" x 6-1/2" size allows easy mount- includes an O-ring for sealing out dirt and contaminants.
ing. Tank incorporates a 3/4" NPT fitting for a vent line and
a drain valve. May be mounted directly to 1-1/2" diameter
tubing.
CARBURETOR LINKAGE ASSEMBLY
JOE34200
23" long, assembly
OIL PRESSURE FITTING includes a heat-treated
JOE42799 aluminum tube, rod ends,
Fitting, which is 1/8" NPT x -3AN, is extended 2-1/4" to provide easier access bolts, springs and carburetor
when connecting line to an oil pressure gauge.

403