Page 405 - 2017 Racecar Engineering Circle Track Parts and Accessories Catalog

FUELCUP JOE34500 PANHARD MOUNT JOE11100
Ideal for jet changes or carburetor service, FuelCup Panhard Mount is CNC-machined from billet alumi-
catches fuel during float bowl removal so it can drain num for durability. Mount design allows simply loosen-
back into float bowl through vent tube. ing the bolts for Panhard bar adjustment. Designed for use
with 1-3/4" diameter bars.

FUEL FILLER TRAILING ARM MOUNT
Machined from billet, 6061-T6 aluminum, Fuel Filler
includes a gasketed, thread-in cap and strong filler JOE11402
neck for safer, easier re-fueling. Choose from three Trailing arm mount includes an added bottom hole for
different designs. increased flexibility, allowing close mounting to the tire and
Part No. Description wheel. Axle centerline to the shock mount measures 6-5/8"
JOE13200 Star Pattern vertically. Steel boss and 1/2" stud provide secure shock
JOE13201 Skull And Bones retention. Mount clamps to 3" diameter axle tubes.
JOE13202 Five Pocket JOE13201
VALVE COVER FASTENERS THIRD LINK MOUNT JOE12150
Remove and replace valve covers quickly. The spring
ball on an extension holds them while they are installed Manufactured from rigid, billet 6061-T6 aluminum,
on each stud. Offered in 4- or 8-packs with 1/4"-20 mount helps secure the third member, while the slotted
(coarse) or 1/4"-28 (fine) threads. design eases chassis adjustments. Sold in pairs.
Part No. Description
JOE34350 1/4"-20, 4-Pack
JOE34352 1/4"-28, 4-Pack
JOE34349 1/4"-20, 8-Pack SPRING PRE-LOADER
Typically used on the right rear, assembly allows running a soft
spring that is pre-loaded so that it maintains a high static load,
SWAY BAR MOUNT JOE11905 providing quicker corner entry and improved traction when exiting
Zinc-plated mount is manufactured from 7/8"-9 threaded x 10" the corner.
long stock and includes a 2-1/8" eyelet welded on the end. Part No. Description
Includes (2) jam nuts. JOE19500 3" Spring Pre-Loader
JOE19501 Pre-Load Travel Indicator
JOE19505 5" Spring Pre-Loader

SWAY BAR BUSHINGS QUICK CHANGE GEAR COVER NUTS
Premium bearing quality bushings prevent binding. One-piece, 3/8"-16 Quick Change Gear Cover
Nuts are made from rigid 7075 billet aluminum
Part No. Description and are cross-drilled to reduce weight and
JOE11915 1-1/4" I.D. x 2-1/8" O.D.
JOE11920 1-1/2" I.D. x 2-1/8" O.D. allow safety wiring, if desired. Sold in 2- or
10-packs.
JOE11925 1-3/4" I.D. x 2-1/8" O.D.
Part No. Description
JOE34358 Quick Change Gear Cover Nuts, 10-Pack
SWIVEL EYE JOE34359 Quick Change Gear Cover Nuts, 2-Pack
AND THREADED STEM
Special swivel eye unbolts, allowing quick sway
bar changes, while also preventing binding.
Part No. Description
JOE11970 Swivel Eye, 1-1/2" I.D.
JOE11975 Swivel Eye, 2-1/8" I.D.
JOE11985 2-1/8" Swivel Eye Only
JOE11990 Shaft Only, 7/8"-9

SWAY BAR ADJUSTER
Bolt the sway bar slider mount style adjuster on both sides
for perfect alignment of big or standard sway bars. Swivel
eye allows dropping the bar out the bottom for quick set-up
changes.
Part No. Description
JOE11950 Sway Bar Slider Mount Adjuster, 1-1/2" Dia.
JOE11955 Sway Bar Slider Mount Adjuster, 2-1/8" Dia.

KOLBY BERRY
404