Page 43 - 2017 Racecar Engineering Circle Track Parts and Accessories Catalog

ENGINE

POLISHED ROUND SB CHEVY OIL RESTRICTORS
DRY SUMP TANKS Oil restrictors reduce the amount of oil flow to the
Aluminum 6" tanks feature a highly top of the engine, reducing the risk of evacuating the oil
polished finish and a completely re- pan in continuous high rpm engines while allowing more oil to be ALL90070
movable top to enable thorough clean- directed to the main and rod bearings. Restrictors have
ing. Three internal baffles are fastened a .055" I.D. hole and include two extra O-ring seals.
to the top for easy removal and Package of 2.
cleaning. All tanks have two 3/8"NPT Part No. Description ALL90071
female ports on the top cover for vent ALL90070 SB/BB Chevy, Aluminum With Hex Head
lines or return lines and a 3/8" female ALL90071 SB Chevy Bowtie Block, Steel With Allen Head
NPT bottom port for easy draining. Note: Not recommended for hydraulic lifter engines.
Tanks are offered in two versions, an
AN version with a -16AN return fitting
and a -12AN supply fitting or an NPT DART/CHEVY SHP OIL RESTRICTORS
version with two 3/4"NPT female ports ALL36095 ALL36101 Oil restrictors for use in Dart SB Chevy SHP blocks are
for return and one 3/4"NPT female supply port. Mounting brackets must be specifically designed for the priority main oil system
purchased separately. to reduce the amount of oil flow to the top of the
Part No. Description engine, reducing the risk of evacuating the oil pan
Tank With AN Fittings in continuous high rpm engines. Kit includes two
ALL36101 16" Tall, 6 Qts.* restrictors, an extra o-ring and detailed installation instructions.
ALL36102 18" Tall, 7 Qts.* Part No. Description
Tank With NPT Fittings ALL90072 † Restrictor Kit With .090" I.D. Hole
ALL36095 16" Tall, 6 Qts.* ALL90073 Restrictor Kit With .030" I.D. Hole
ALL36096 18" Tall, 7 Qts.* † Smaller port size may be modified as needed for preferred amount of
oiling.
Replacement Parts ALL99075
ALL36124 Cap
ALL99075 Top O-Ring ALL36124 OIL COOLERS - FLANGE MOUNT
* Capacity listed is fluid filled to approximately 4" from top of tank. Adding an oil cooler to a vehicle increases
Note: 1" of tank height equals approximately 1/2 quart of fluid. engine life and reduces engine operating
temperature. Engine oil not only lubricates
ROUND DRY SUMP TANK but also removes a large amount of heat
from the engine. Top engine builders recom-
MOUNTING KIT ALL36094 mend and often require use of an oil cooler. Coolers
Mounting with front motor plate on left side of have a 1/2"NPT female bung commonly used for connecting a temperature
engine, bracket angles outward slightly for sending unit or similar accessories and have built in flanges for mounting to the
extra clearance, and its non-slip material deck underside of most dirt late models, modifieds or other vehicles that would
protects the tank. Mounting straps and tank benefit from use of an oil cooler.
protectors are included. Part No. Description
Cooler With -10AN Fittings,
ALL30146
IMMERSION HEATERS 4" x 15" x 3-1/2" Tall For Most Wet Sump Systems
Immersion style heater preheats oil in wet ALL30145 Cooler With -12AN Fittings,
sump oil pan or dry sump tanks to reduce 8-3/4" x 15" x 3-1/2" Tall For Most Dry Sump Systems
overall warm up time and improve lubrica-
tion during initial start up. 5/8" diameter OIL COOLER SCOOPS
stainless steel sleeve inserts into pan or Scoop mounts to the deck of most
tank and secures with a welded on 1/2" race cars above the oil cooler forcing
NPT brass screw-in fitting. 120-volt operation. air through the oil cooler to aid cooling. Black plastic
Part No. Description scoop has a carbon fiber look and measures 11" x 7" with a
ALL76415 4-3/4" Long Heater Element w/3' Long Cord, 400W 3" tall opening and approximately a 1" mounting lip.
ALL76416 7-1/2" Long Heater Element w/12" Long Cord, 250W Part No. Description
ALL23228 Scoop With 7" Wide Opening
HEATING PADS ALL23229 Scoop With 11" Wide Opening
High temperature silicone heating
pads externally preheat oil in wet LINEAR ENGINE
sump oil pans, dry sump tanks OIL COOLERS
and automatic transmission pans ALL76422 Finned aluminum coolers have
reducing overall warm up time and 3/4" NPT ends and T-slots for easy
improving lubrication during initial start up. 3" cord, 120-volt operation. mounting.
Part No. Description Part No. Description
ALL76420 2"x15", Self Adhesive Pad, 200W ALL30142 3 Ft.
ALL76422 5"x7", Self Adhesive Pad, 375W ALL30143 4 Ft.
ALL76424 6"x12", Velcro Strapped Pad For 6" O.D. Tanks, 435W ALL30144 5 Ft.

42