Page 166 - 2020 Allstar Performance Parts and Equipment Catalog

SPRINT CAR COMPONENTS

Sprint Car Dry Sump Tank Sprint Car Wash Plug Set
Mounting Brackets ALL36092 Aluminum plugs have O-rings for a
Mounting brackets are designed to mount watertight seal and will keep dirt out
6" diameter tanks to the left front of injectors while cleaning sprint car.
corner of standard small block Chevy ALL36093 4-piece set comes with a nylon storage
engines. Commonly mounted with pouch.
ALL38145 sprint motor plate, the upper
bracket utilizes the water pump mounting holes and the ALL26072
lower bracket fastens to the early front engine mount Part No. Size Wash Plug Dia. Stack Dia.
mounting hole. Kinsler
ALL26072 2-1/4" 2.328" 2.335"
ALL36092 ..... Upper Tank Mount
ALL36093 ..... Lower Tank Mount ALL26073 2-11/16" 2.762" 2.790"
ALL26074 2-3/4" 2.848" 2.875"
ALL26075 2-13/16" 2.921" 2.950"
ALL26076 2.90" 2.973" 3.00"
Heating Pads Engler
High temperature ALL76422 ALL26033 2-1/2" 2.632" 2.650"
silicone heating pads ALL26035 2-13/16" 2.885" 2.905"
externally preheat oil in wet sump oil pans, dry sump ALL26036 2.90" 2.973" 3.00"
3"
ALL26038
3.10"
3.073"
tanks and automatic transmission pans reducing overall Hilborn
warm up time and improving lubrication during initial ALL26032 2-7/16" 2.483" 2.50"
start up. 3" cord, 120-volt operation.
ALL76420 ..... 2"x15", Self Adhesive Pad, 200W
ALL76422 ..... 5"x7", Self Adhesive Pad, 375W Compact Electric Fuel Pump
ALL76424 ..... 6"x12", Velcro Strapped Pad For 6" O.D. Tanks, 435W ALL40320
WARNING! Do not plug heater in without being installed
on tank or metallic surface to absorb heat. Element heats High flow, low pressure elec-
up quickly and damage will result. tric fuel pump equipped with a
5/16" inlet/outlet. The pump flows
18 gph at 4.0 psi, 5.5 psi maximum.
Includes a rubber padded mounting bracket
Immersion Heaters and two heavy duty hose clamps. Rated 12V/5 amps.
Immersion style heater preheats oil Overall length is 5-1/2" x 1-1/2" wide.
in wet sump oil pan or dry sump
tanks to reduce overall warm up
time and improve lubrication during Fuel Pressure Gauge
initial start up. 5/8" diameter stainless steel sleeve
inserts into pan or tank and secures with a welded on ALL40330
1/2"NPT brass screw-in fitting. 120-volt operation. Fuel pressure indicator gauge allows pre-
ALL76415 ..... 4-3/4" Long Heater Element w/3' Long Cord, 400 W adjustment of the high speed secondary
ALL76416 ..... 7-1/2" Long Heater Element w/12" Long Cord, 250 W and main valve opening pressures using
a compressed air source. Gauge can be
WARNING! Do not plug heater in without being installed
in tank and submersed in liquid, element heats up quickly mounted directly to the wall or tool
and damage will result. box. 4-1/2" diameter dial has a 0-160 PSI range.

Down Nozzle Filters
Down nozzle filters optimize spray and eliminate
dirt and debris.
ALL40325 ..... Down Nozzle Filters, 8-Pack
ALL40326 ..... Down Nozzle Filter, Each

Down Nozzle Plugs ALL40327
Plug off ports in down nozzle filters. 1/2"-20
thread seals with included O-ring. Package of 8.

Tyler Courtney Photo: JohnnyB Imagery
164 www.allstarperformance.com