Page 161 - 2020 Allstar Performance Parts and Equipment Catalog

Inside Air Blower Motor Helmet Blower System ALL13020
ALL13000 Remote mount breather system directs filtered, forced air
Inside air unit is commonly mounted to the driver’s helmet for added comfort and safety. Motor
inside the cockpit or decking to pro- assembly has a mounting bracket for easy mounting to chassis
vide forced, filtered air to the driver for or seat back. 4' helmet hose connects to most helmet fresh
cooling and to help prevent shield fogging. air intakes with standard 1-1/4" connector. The
Spun aluminum cover prevents damage to filter 9' extension lead can be easily connected
assembly. Motor has two speeds and is recommended for to a switched 12-16 volt source. This system SAFETY/DRIVER EQUIPMENT
12 volt systems. weighs 2-1/4 lbs, and draws 3.5 amps at
13.6 volts, and produces about 90 CFM
Replacement Parts of air to the driver, providing more than
ALL13014 ...... Filter enough air to keep the driver cool and
ALL99022 ..... Top shield clear.
Outside Air Blower Motor Replacement Parts
ALL36202 ..... Filter
ALL13001
ALL36203 ..... Filter With Shield
Outside air unit is commonly mounted inside ALL99021 ..... Wire Harness
the driver compartment on vehicles with win-
dows or closed compartment to provide forced, filtered
air to the driver for cooling and to help prevent shield
fogging. Intake top can be used with 1-1/4" helmet hose Mini Helmet Air System ALL13012
or trimmed to accept larger 3" hose, such as ALL42150, Self-contained, 12-volt fan
routed to the motor from outside of the car or fastened with reusable filter moves
to a plastic duct, such as ALL42143, for fresh air. Motor approximately 40-60 CFM
has two speeds and is recommended for 12 volt systems. of air depending on system
voltage. An RF connector
Replacement Parts allows easy, unrestricted
ALL13014 ...... Filter helmet removal. A 14" wire
ALL99023 ..... Top
is permanently attached to
the fan and accepts the 24" pigtail (included). Pigtail has
Helmet Fan ALL13011 simple red (+) and black (-) wire hook-ups.
Compact inline blower fan connects
to 1-1/4" helmet hose and forces air
inside driver’s helmets equipped with an air inlet
to help prevent shield fogging and provide air Hose Adapter ALL13007
movement. Fan produces 20+ cfm of air flow when used Adapter fits most helmet hoses with 1-1/4"
on a 12V system, drawing only 1.3 amps. Two wire pigtail ends and has a 2-3/4" O.D. to fit inside 3"
easily connects to a switched 12V power source and a duct style hose or inside some NACA ducts.
suitable chassis ground. Adapter may also be mounted in a window opening to
funnel air directly to the driver via helmet hose.
Helmet Vent Hose
Hose is 4' long and used to complete
the connection between a driver air Helmet Dryer ALL13018
system and helmets equipped with Dryer is a table top
a 1-1/4" barbed intake port. Two unit that circulates NEW!
styles are available: ALL13004 air throughout the inside
is gray and constructed from of a helmet removing
a denser material to resist moisture that commonly
crushing and abrasions from rocks and debris; leads to dangerous mold
ALL13021 is black and constructed of a thinner and bacteria growth. Dryer
more pliable material which is less restrictive to the driver. base measures 11" x 13"
ALL13004 ..... Gray and includes a removable
ALL13021 ..... Black clip to fasten a dryer sheet
to help freshen the inside of the helmet. Unit connects
Helmet Vent ALL13025 to a 110V power source and features a cord mounted on/
High-impact, screened ABS vent minimizes off switch.
the chance of rocks and other debris from
entering helmet hose. Vent has a 1/2" wide
mounting flange and a centered outlet that
accepts most 1-1/4" helmet hoses.
www.allstarperformance.com 159