Page 156 - 2020 Allstar Performance Parts and Equipment Catalog

REAR ENDS & AXLES

Steel Driveshafts Universal Driveshaft
Loop ALL69000
Universal driveshaft loop
contains the driveshaft if a yoke
Driveshafts are built from 2-1/2" O.D. x .065" wall,
D.O.M. steel tubing, balanced, painted white and com- or U-joint fails. Loop is 1/4" thick x 2"
pletely assembled with greaseable 1310 series (3-1/4") wide mild steel and fully adjustable to fit most cars.
U-joints. Driveshafts also include a popular 27-spline
slip yoke to work with Powerglide, TH350, Bert, Brinn Driveshaft Loop
and many other transmissions. Yoke measures 5.50" For 1979-2004
from U-joint centerline to end with 3.50" of slip length. Mustangs ALL69006
Dimensions listed are from center to center of U-joints.
Driveshaft safety loop bolts-on to help retain
ALL69019 ..... 29.5" the front of the driveshaft in the event of a U-joint
ALL69020 ..... 30.5" or other drivetrain component breakage. Black epoxy
ALL69022 ..... 31.5" coated, all steel loop includes mounting hardware and
ALL69023 ..... 32"
ALL69024 ..... 32.5" complete instructions. Loop is designed to fit inside fac-
tory tunnel and work with most driveshafts up to 4" in
Related Parts diameter.
ALL69015 ..... U-Bolt Kit
ALL69030 ..... 1310 U-Joint
Unwelded Driveshaft Loop
ALL69042
Slip Yokes ALL69043 ALL69004
Slip yokes provide an important link Made from 3/16" flat steel, loop
in today’s driveline and chassis combi- is 9-1/2" tall, 5-1/2" wide with a
nations. Yokes are available in standard 16" wide mounting strap that can
length for most street applications with be cut and welded for each installation.
minimal suspension travel to extra-long 6-3/4"
for racing suspensions that have a radical 180° Driveshaft Loop ALL69002
amount of travel. 27-spline yokes accept Pre-bent 1" diameter x .083" wall mild steel
4-3/4"
1310 style U-joints and are for use in many tubing is designed for chassis style cars to help
popular transmissions including TH350, retain the driveshaft in the event of a U-joint
TH700R4, Muncie and Saginaw 3 and 4 failure. Loop is 10" tall overall and has a 5" I.D.
speeds, Bert and Brinn non-ball spline.
Torque Tube Belt ALL10181
ALL69040 ..... 6"
ALL69042 ..... 6-3/4" Universal strap keeps
ALL69044 ..... 7-1/2" torque tube stabilized and
ALL69046 ..... 8" centered in case of coupler
ALL69048 ..... 8" (Extra Clearance) or tube failure. Black 3" wide belt fits all torque tube and
chassis combinations.
Hardened
ALL69043 ..... 6-3/4"
ALL69045 ..... 7-1/2" Torque Ball
ALL69047 ..... 8" Safety Blanket ALL55220
Fire resistant safety blanket
Tailshaft Seal designed by Jason Meyers
And Bushing Racing protects drivers legs and
The tailshaft bushing is a regular feet in the event of a U-joint
wear item, located inside the transmission failure. Ballistic nylon covered
tailshaft housing. It should be replaced when blanket weighs just 1-1/2 lbs. and
ALL72152 has quick release adjustable straps that allow blanket to
replacing the tailshaft seal or when a driveshaft
failure has occurred. A worn bushing will cause exces- be removed easily for servicing torque ball and U-joint.
sive side-to-side movement of the slip yoke and create a Blanket includes two mounting brackets, mounting studs,
vibration or leak. Replacement bushing and seal fits GM nuts and installation instructions.
Powerglide, Turbo 350, Saginaw, Muncie, Bert and Brinn Replacement Parts
transmissions. ALL55224 ..... 3/8" Mounting Stud Kit
ALL72150 ..... Seal ALL55226 ..... Mounting Tabs, 1-Pair
ALL72152 ..... Seal With Bushing

154 www.allstarperformance.com