Page 152 - 2020 Allstar Performance Parts and Equipment Catalog

REAR ENDS & AXLES

Quick Change Gear Totes Gear Tote Tray
ALL12269
Neatly organize up
to 10 quick change
gear tote boxes verti-
cally. Tray is 21" long
x 5-1/2" deep with
a 4" tall front edge
making them per-
fectly sized for Allstar gear tote boxes.
Durable plastic quick change gear tote organizes extra
gear sets and keeps them clean. Lid snaps shut to hold
gears in place. 8"L x 5"W x 2"H.
Description Single 10-Pack
White ALL14350 ALL14350-10
Black ALL14351 ALL14351-10
Yellow, 6-Spline (Midget) Gear Set ALL14352 ALL14352-10

Ring And Pinion Installation Kits
Allstar ring and pinion installation kits are available with or without bearings. Kits contain all the hard-to-find individual
parts for a quick, trouble-free installation.
Shim Kits Include:*
Bearing Kits Include:*
• Pinion And Side (Carrier) Bearings • Pinion Seal
• Pinion Seal • Pinion Depth Shims
• Pinion Depth Shims • Adjustable Side (Carrier) Shims,
• Adjustable Side (Carrier) Shims Two (If Applicable)
• Crush Sleeve Or Solid Spacer • Crush Sleeve Or Solid Spacer
• Pinion Nut • Pinion Nut
• One Ounce Tube Of Silicone Or Gasket • One Ounce Tube Of Silicone Or Gasket
• Gear Marking Compound • Gear Marking Compound
• Ring Gear Bolts • Ring Gear Bolts
*Kit components shown for reference only, specific components will vary depending on application.
Bearing Kit Shim Kit Carrier Type Application
General Motors
ALL68515 ALL68615 10-Bolt 7.5", Passenger And Light Truck S-10 1982-1998
– ALL68616 10-Bolt 7.5", Passenger, Except Monza 1977-1981
– ALL68622 10-Bolt 8.2", Chevy Passenger And G-10 Van, 30-Spline Pinion
ALL68521 ALL68621 10-Bolt 8.5", 30-Spline Pinion Passenger And Light Truck
ALL68518 ALL68618 12-Bolt 8.875", Chevy And GMC Truck And Blazer, 1.438" Pinion
ALL68519 ALL68619 12-Bolt 8.875", Chevy Hi-Performance Passenger Axle, 1.625" Pinion
Chrysler
ALL68532 ALL68631 8-3/4" 489 Casting With 2.000" I.D. Carrier Bearings (Large #9 On Side Of Casting)
ALL68531 ALL68631 8-3/4" 489 Casting With 1.796" I.D. Carrier Bearings (Large #9 On Side Of Casting)
ALL68537 ALL68637 8-3/4" 742 Casting With 1.796" I.D. Carrier Bearings (Large #2 On Side Of Casting)
Ford Motor Company
– ALL68639 8" “Pig” Type, 25-Spline Pinion
ALL68513 ALL68613 8.8" Salisbury Type With 10-Bolt Cover, 30-Spline Pinion
ALL68510 ALL68610 9" 2.893" Carrier Bearing, Stock 28-Spline Pinion Support, Solid Spacer
ALL68511 ALL68611 9" 2.893" Carrier Bearing, Stock 28-Spline Pinion Support, Crush Sleeve
ALL68509 ALL68610 9" 3.062" Carrier Bearing, Stock 28-Spline Pinion Support, Solid Spacer
ALL68512 ALL68611 9" 3.062" Carrier Bearing, Stock 28-Spline Pinion Support, Crush Sleeve
ALL68539 ALL68610 9" 3.062" Carrier Bearing, Daytona 28-Spline Pinion Support, Solid Spacer
ALL68538 ALL68611 9" 3.062" Carrier Bearing, Daytona 28-Spline Pinion Support, Crush Sleeve
ALL68543 ALL68610 9" 3.250" Carrier Bearing, Daytona 28-Spline Pinion Support, Solid Spacer
ALL68542 ALL68611 9" 3.250" Carrier Bearing, Daytona 28-Spline Pinion Support, Crush Sleeve
ALL68540 – 9" 3.250" Carrier Bearing, MW or Strange 28-Spline Pinion Support, No Spacer Or Crush Sleeve
ALL68541 – 9" 3.250" Carrier Bearing, MW or Strange 35-Spline Pinion Support, No Spacer Or Crush Sleeve
Dana
ALL68533 ALL68633 – Model 44/1967-1997
ALL68534 ALL68634 – Model 60 And 61/1966-1998

150 www.allstarperformance.com