Page 153 - 2020 Allstar Performance Parts and Equipment Catalog

Dial Indicator With Magnetic Base Ring And Pinion
ALL96414 Gear Sets
Dial indicator with magnetic base is a Quality differential components
necessity when degreeing a camshaft, are suitable for race, street and
checking crankshaft end play, deck off-road use. Lapped in matched REAR ENDS & AXLES
heights, dome heights, transmission end sets for quiet operation.
play or ring and pinion backlash. Universal
magnetic base may be mounted anywhere. GM 7.5"
Shockproof dial indicator has 1" of travel in Sets fit 10-bolt with 7.5" ring gear,
.001" increments. Base and dial indicator may 1.438" diameter pinion stem and 27-spline pinion.
also be purchased separately.
Part No. Ratio Tooth Part No. Ratio Tooth
ALL96415 ..... Dial Indicator Only ALL70110* 3.23 42-13 ALL70115 † 3.73 41-11
ALL96416 ..... Magnetic Base Only ALL70112* 3.42 41-12 ALL70116* 4.10 41-10
ALL70113 † 3.42 41-12 ALL70117 † 4.10 41-10
Digital Calipers ALL70114* 3.73 41-11 ALL70118* 4.56 41-9
0-6" With Case *Set includes standard width ring gear for use with 3.23 and numerically
higher ratio carriers or when using 3.08 and numerically lower ratio carriers and
ALL96411 ALL70100 spacer.
Measure inside, outside †Set includes thick ring gear for use with 3.08 and numerically lower ratio carriers.
and depth dimensions with easy
to read Metric or SAE LCD display, GM 8.5"
in .001" increments up to 6". On/off switch conserves Sets fit 10-bolt with 8.5" ring gear, 1.625" diameter
battery and zero setting assures accurate readings. Plastic pinion stem and 30-spline pinion.
case provides additional battery storage. Part No. Ratio Tooth Part No. Ratio Tooth
ALL70120 3.08 40-13 ALL70126 4.10 41-10
Dial Caliper ALL70122 3.42 41-12 ALL70128 4.56 41-9
ALL70124 3.73 41-11
ALL96410
Quality hardened Ford 9"
stainless steel dial Sets fit 10-bolt with 9" ring gear, 1.313" diameter pinion
caliper is shockproof stem and 28-spline pinion.
and capable of measuring items from
.001" to 6" in increments of .001". Includes protective Part No. Ratio Tooth Part No. Ratio Tooth
carrying case. ALL70010 3.50 35-10 ALL70028 5.14 36-7
ALL70012 3.70 37-10 ALL70030 5.29 37-7
ALL70014 3.89 35-9 ALL70032 5.43 38-7
ALL70016 4.11 37-9 ALL70034 5.67 34-6
ALL70018 4.30 39-9 ALL70036 5.83 35-6
ALL70020 4.56 41-9 ALL70038 6.00 30-5
ALL70022 4.71 33-7 ALL70040 6.20 31-5
ALL70024 4.86 34-7 ALL70042 6.33 38-6
ALL70026 5.00 30-6 ALL70044 6.50 39-6

GM 7.5" Ring Gear Spacer
ALL70100
Spacer allows installation of 3.23 and
numerically higher ratio gear sets with
standard thickness ring gears into
Andy Bozell Photo: RW Motorsports
3.08 and numerically lower carriers. Steel spacer is .3125"
thick and includes ten 7/16"-20 x 1-1/4" UHL LH bolts.

Gear Marking Compound Kit
ALL78250
Gear marking NEW!
compound kit
is a good way to identify correct
gear contact area when installing or
adjusting ring and pinion gear sets. Kit
includes gear marking compound and application brush.

Phil Bozell Photo: RW Motorsports
www.allstarperformance.com 151