Page 35 - 2020 Allstar Performance Parts and Equipment Catalog
P. 35
BRAKE
Steel Brake Line Inverted Flare Nuts
Steel brake line is available in 3/16" and 1/4" flare nuts are used for building
lengths from 8" to 72" for custom brake lines. Nuts are available to fit most
plumbing brake systems. master cylinders and metering/proportioning valves. Select
Standard galvanized zinc coating. proper thread size for line used.
3/16" Line Part No. Size Color Qty.
Length With 3/8"-24 Ends Flare Nuts For 3/16" Brake Line
8" ALL48048 ALL50110 3/8"-24 Zinc Plated 10-Pack
12" ALL48050 ALL50111 3/8"-24 Stainless 10-Pack
20" ALL48052 ALL50113 7/16"-24 Red 2-Pack
30" ALL48054 ALL50114 1/2"-20 Green 2-Pack
40" ALL48056 ALL50115 9/16"-18 Olive 2-Pack
51" ALL48058 Flare Nuts For 1/4" Brake Line
60" ALL48060 ALL50116 7/16"-24 Zinc Plated 10-Pack
72" ALL48062 ALL50117 7/16"-24 Stainless 10-Pack
ALL50118 1/2"-20 Gold 2-Pack
ALL50119 9/16"-18 Blue 2-Pack
Stainless Steel Brake Line
Tubing Cutters
304 Grade stainless steel line exceeds SAE and DOT ALL11010
requirements. Pre-made lines include standard size stain- Cut plastic, aluminum,
less ends for years of service and show quality finish. copper or steel tubing
without distorting or ALL11011
crushing. Standard
cutter works with tubing from 1/8" up to 1-1/8" and has
3/16" Line 1/4" Line wide rollers for even tracking of cutter wheel, built in
Length With 3/8"-24 Ends With 7/16"-24 Ends reamer for cleaning inside of tubing and an extra cutting
8" ALL48300 ALL48310 wheel. Mini cutter can cut tubing from 1/8" to 5/8" in
12" ALL48301 ALL48311 tight areas.
20" ALL48302 ALL48312
30" ALL48303 ALL48313 ALL11010 ...... Mini
40" ALL48304 ALL48314 ALL11011 ...... Standard
51" ALL48305 ALL48315
60" ALL48306 ALL48316 Double Flare Tool ALL11015
72" ALL48307 ALL48317
Double flares 3/16", 1/4", 5/16", 3/8" and
1/2" steel or aluminum and
Coiled Tubing .040" copper tubing at 45°,
the most common flare used
Coiled tubing works great for in custom length brake and fuel lines.
building custom length brake lines Includes instructions and a plastic storage case.
without unions. Tubing is easily cut
and flared to desired length. Stainless TECH TIP
tubing is 304 grade and double annealed for easy flaring A few helpful tips to help when flaring stainless steel
and bending. Coiled tubing does not include flare nuts tubing and prevent splitting the line when flaring. Cut
(sold separately).
with a hacksaw or cut-off wheel, not a tubing cutter.
ALL48040 .... 3/16" Standard Zinc, 25' Using a step drill such a ALL11040, slightly chamfer the
ALL48308 ..... 3/16" Stainless, 20' inside I.D. of the tubing. Using a bench grinder, slightly
ALL48326 ..... 1/4" Standard Zinc, 25' bevel the outside edge.
ALL48318 ..... 1/4" Stainless, 20'.
Line Clamps
Gravel Guard
Choose from rubber cushioned
Brake Line Protector aluminum, nylon or clamp-on ALL18300 ALL18310
Guard protects steel and plastic brake aluminum in 3/16" and 1/4". ALL18301 ALL18311
lines against possible damage
caused by gravel, rocks and other 3/16" Line Clamps
ALL18300 ..... Rubber Cushioned
road/track debris. Zinc coated Aluminum, 10-Pack
steel material is placed over tubing or brake line before ALL18310 ..... Nylon, 10-Pack ALL18320
ends are installed. Sold in 8' long lengths. ALL18320 ..... Clamp-On Aluminum, 4-Pack ALL18321
ALL48330 ..... 3/16" 1/4" Line Clamps
ALL48332 ..... 1/4"
ALL18301 ..... Rubber Cushioned Aluminum, 10-Pack
ALL18311 ...... Nylon, 10-Pack
ALL18321 ..... Clamp-On Aluminum, 4-Pack
www.allstarperformance.com 33