Page 157 - 2018 Allstar Performance Parts and Equipment Catalog

Nose Wing Wing Line Kit
Wall Mount Brackets ALL48006
ALL12214 Kit with strong, light-
Brackets attach to the side of trailer weight, ultra flexible,
wall to hold a spare sprint car front heat resistant, braided
nose wing safely in place. Powder lines simplifies plumbing
coated aluminum of KSE Gen2 steering gear and SPRINT CAR COMPONENTS
brackets feature wing cylinder. Complete kit
slotted arms which includes two #4 slider lines (22"
are fully adjustable long and 36" long), one pressure line and one return line
to accommodate (both 18" long), four 45° aluminum valve fittings, two 90°
a variety of nose aluminum cylinder fittings and two O-rings.
wing shapes and
sizes. Sold in pairs Top Wing Trees
with retention straps to keep wing secure. Wing trees have an “X” ALL55130
design for lateral ALL55132
Wing Caps and horizontal
strength. Available
in 16" and 18"
tall versions, each
tree is adjustable and
Prevent rock and debris from damaging the leading edge will extend up to 6"
of many popular sprint car wings with a protective cap. with adjustment holes
ALL23220 ..... Top Wing Cap, 60" Long, High Impact Plastic located at 1" increments.
ALL23222 ..... Front Wing Cap, 36" Long, High Impact Plastic 16" trees are ideal for X
ALL23221 ..... Top Wing, 60" Long, Carbon Fiber wedge cars to keep the
ALL23223 ..... Front Wing, 36" Long, Carbon Fiber back of the top wing lower ALL55131
ALL55133
while providing optimal top
Manual Wing Adjuster ALL48004 wing tilt at high speed tracks.
4130 chrome moly 3/4" x .060"
tube construction. Wing trees are
26" wide at the top and have a min/max bottom width of
Manual wing adjuster is for sprint car top wings when rules 25-3/4" to 26-1/2". Adjuster pins not included.
do not permit the use of hydraulic cylinders. Aluminum
slider includes 3/8"-24 steel rod ends and is adjustable from Part No. Height Finish
20" to 32" center to center in 1" increments with included ALL55130 16" (Extends To 22") Black
1/4" locking pin. Weighs less than 1 lb. ALL55131 16" (Extends To 22") Plated
Black
18" (Extends To 24")
ALL55132
ALL55133 18" (Extends To 24") Plated
Hydraulic Wing Cylinders Related Parts
ALL17028...... Titanium Adjuster Pins, (1-Pair)
ALL55134 ..... Top Wing Tree Slider, Black
ALL55135 ..... Top Wing Tree Slider, Plated
Strong hydraulic wing cylinders have an aluminum body
which houses a steel piston and pushrod assembly. Titanium Top Wing Pin Kit
Available in 10" and 12" length.
ALL48000 .... 10" ALL17028
ALL48002 ..... 12" Kit includes two pins with locking clips for
adjusting wing tree height.
Titanium Studs For Wing Cylinders
Single stud used to mount the wing Top Wing Titanium Posts
cylinder to the chassis or wing tree. Stud ALL55128
has 3/8"-24 threads for mounting most ALL17036 Top posts are 12" long overall
cylinders. Mounting nuts not included. and have a 5/16" diameter
Sold each. T-bar to fit a wide range of 7/8"
ALL17036 ..... 5/16"-24 x 3/8"-24 x 1.640" Stud ALL17038 wings. Position of T-bar is set at
ALL17038 ..... 3/8"-24 x 3/8"-24 x 1.600" Stud 75 degrees providing additional
wing angle. Strong titanium 1"
tube construction. Posts weigh
only .50 Lb. each and are sold
as a pair.
www.allstarperformance.com 155