Page 200 - 2018 Allstar Performance Parts and Equipment Catalog

SUSPENSION High Misalignment Aluminum Flat Spacers

Reducer Spacers
Flat spacers are great for shimming and
adding additional clearance to brackets for
Dual purpose spacers
brake calipers, power steering, alternators, dry sump
reduce fastener size
mounting hole and allow
issues. Package of 2.
the rod end to rotate more than 30
degrees in each direction which is 25% pumps or just about anything to help with alignment
Thickness 3/8" I.D. (11/16" O.D.)
1/2" I.D. (1" O.D.)
more than most standard spacers. 1/8" ALL18740 ALL18760
Stainless steel spacers resist rust and 1/4" ALL18742 ALL18762
corrosion. Package of 2. 3/8" ALL18744 ALL18764
1/2" ALL18746 ALL18766
Tapered Spacers
Rod End O.D. Length Overall Universal spacers have many uses
Size I.D. “A” “B” Width “C” Part No. including spacing rod ends on linkages
5/8" 1/2" .750" .465" 1.68" ALL18785
3/4" 1/2" .890" .475" 1.825" ALL18786 to prevent binding or just to provide
3/4" 5/8" .890" .475" 1.825" ALL18787 clearance. Spacers provide a finished look
when fitting body panels or spacing components away
5/8" Rod End Reducer Spacers from floors and firewalls. Package of 2.
Reducer spacers fit into 5/8" rod ends, reducing the hole I.D. Small O.D. Large O.D. Length Steel Aluminum
size for 1/2" hardware while also spacing the rod end 1/4" .345 .500 1/4" – – ALL18700
ALL18702
1/2"
away from chassis brackets. Standard spacers are 3/4" 1/4" – ALL18706
O.D. and flanged spacers have 1" O.D. flanges to help 5/16" .475 .625 1/2" – ALL18708
support rod end. Size referenced indicates the amount 1/4" – ALL18712
of space between rod end pivot ball and chassis bracket. 3/8" .525 .680 1/2" – ALL18714
1"
–
Package of 2. 1/4" ALL18570 ALL18716
ALL18590
Standard Spacers 3/8" ALL18571 –
ALL18615 ...... Aluminum, 1/2" 1/2" .740 .995 1/2" ALL18572 ALL18592
ALL18617 ...... Aluminum, 1" 3/4" ALL18574 ALL18594
1" ALL18576 ALL18596
Flanged Spacers ALL18615 ALL18612 1-1/2" ALL18578 ALL18595
ALL18611 ...... Aluminum, 1/4" 1/4" ALL18580 ALL18597
ALL18613 ...... Aluminum, 1/2" 1/2" ALL18582 ALL18598
ALL18610 ..... Steel, 1/4" 5/8" .825 .995 3/4" ALL18584 ALL18599
ALL18612 ...... Steel, 1/2" 1" ALL18586 –
1-1/2" ALL18585 –
1/2" ALL18587 –
Rod End 3/4" .950 1.125 3/4" ALL18588 –
Reducer Bushings 1" ALL18589 –
Steel bushings reduce the rod end pivot QC Axle Tube
ball I.D. to accept a smaller bolt size.
Support Brackets
O.D. To I.D. 2-Pack 10-Pack Brackets provide mounting
1/2" To 3/8" ALL18565 ALL18565-10 points for a strut rod
5/8" To 1/2" ALL18566 ALL18566-10
3/4" To 1/2" ALL18567 ALL18567-10 assembly to help eliminate ALL68320 ALL68322
3/4" To 5/8" ALL18568 ALL18568-10 flex found in quick change
rear ends. ALL68320 attaches to the side bell bolts on
Shock Spacers most quick change rear ends. Suspension Tubes
Steel spacers have a 1/2" I.D. and 3/4" ALL68322 has tabs with 1/2" See Page 196
O.D. and can be used in a variety of holes and mounts directly onto a
other locations. 3" axle tube.
ALL68320 ..... Center Section Mount ALL68320
Length 2-Pack 10-Pack ALL68322 ..... Axle Tube Mount ALL68322
1/4" ALL64280 ALL64280-10
1/2" ALL64282 ALL64282-10 Lift Bar Retainer Clamp
5/8" ALL64283 ALL64283-10
3/4" ALL64284 ALL64284-10 ALL68325
Bracket clamps around 3" axle tubes
providing a mounting point for a lift
bar support rod. 1" wide bracket has
angled tabs with 1/2" holes for Top View
mounting a strut rod with 1/2" rod ends.
198 www.allstarperformance.com