Page 6 - Hanging Sleeping Planter test

Step 6: Sanding

Place water sanding paper in a water bath for about 15-30 minutes.

Place a small bowl with water and soap next to you.

Sand the print while dipping the paper in the soap water to help clean out the print while sanding.

After sanding, it should be perfectly smooth, if not, and you've reached the PLA with the sanding, coat again with
primer and repeat the sanding process again.

Step 7: Second Priming

Take any paint primer and make a thin even coat on your print. I used a cream shade to create another warm
undertone for my planter.

Hanging Sleeping Planter (Tinkercad): Page 6