Page 16 - Router Boss Manual

TIP - The scale can be mounted outboard so the
Loosen the cursor on the left side of the sliding bar zero mark on the ruler is not positioned under the
and position it directly over the 0” mark on the scale. base plate. You can use any whole inch mark, such
(If you have the optional digital scale, press the “zero” as 3”, as your starting point. Just record the set-
button). On a piece of paper, make a “Right” column tings so you can replicate the cuts.
and a “Left” column. Write this reading down under When using the manual scale, round to the nearest
the right column. 32nd.

Now turn the crank to align the left edge of the bit on
the left edge of the next finger cut. Read the scale and
write this number in the left column. (Notice that the
digital scale also displays the nearest fractional inch.)

TIP - When using the digital scale, +/- .003 accu-
racy is more than sufficient for woodworking.

16