Page 103 - IMER_2021-07_MPT_cat_en_Neat

PRO-TEK LINE Compatible Accessories

STATORS AND ROTORS COMPARISON
Stator No Spinning stator Clamp stator Mono stator Mono Clamp stator
• Highly abrasion resistant • With anti-rotation tab • With bolts for wear • Highly abrasion resistant • With bolts for wear
rubber • Highly abrasion resistant compensation rubber compensation
• Self-setting rubber • Highly abrasion resistant • Self-setting • Highly abrasion resistant
• Self-setting rubber • Suitable for single-phase rubber
machines • Suitable for single-phase
machines
Flex rotor Rotor Rotor with tab Monoflex rotor Mono rotor
• Abrasion resistant steel • Special steel, highly • With drive tab for turbo mixer• Abrasion resistant steel • Highly abrasion resistant
abrasion resistant special steel
• Hardening heat treatment • Highly abrasion resistant • Hardening heat treatment
• Hardening heat treatment special steel • Hardening heat treatment
• Hardening heat treatment • Suitable for single-phase
machines

Koine mixing shafts

1107542 Standard mixer 1107597 Mixer for self-levelling floor screeds

Turbomixer for “D” series stators.
1107541 Mixer for lightened materials 1107517
Manifold outlet Ø 25M and Ø 35M
Turbomixer for stators "R" series
1106325 with pressure gauge included.
Manifold outlet Ø 25M and Ø 35M

Plaster / Stucco / Traditional mortar / Fireproofing spray guns
Ø 25 F spray gun for traditional /premixed Ø 25 F spray gun with no-spreading ball
1107540 1107568
plaster with Ø14 duse valve and air flow regulator
Ø 25 F spray gun, 1.43 m long for Ø 35 M spray gun for
1107549 1107577
fireproofing and premixed plaster traditional plasters / premixed / stucco

Finishing coat / Decorative plaster / Spacing / Injections spray gun
Ø 25 F spray gun for finishing coat / filling 1107561 Kit 3 deflectors Ø 5 hardened steel for
/ touch pointing / injections finishing coat and decorative plaster
1107011
without deflectors, with air flow regulator Kit 3 deflectors Ø 6 hardened steel for
and no-spreading ball valve 1107562 finishing coat and decorative plaster
Kit 3 deflectors Ø 8 hardened steel for
1107563
Deflector kit 5-6-8-12-16 tempered finishing coat and decorative plaster
1107604
stainless steel Kit 3 deflectors Ø 12 hardened steel for
1107564
fills deep spaces by spraying the mortar
1107567 Deflector with hose connector 13-16 mm

Guns for Grouting / Spacing fills Shotcrete guns
Spacer filler gun for A1 panel with
1107504 control sensor: On-Open / Off-Closed Shotcrete gun for additive - Ø 50 coupling
24V socket
Conical tube gun for spacing Ø 25 1107192 cams and 3/4" quick couplings. Double
1107499 • Sectionable steel tube to obtain the inlet for air and accelerating additive
desired outlet diameter.
• No spreading ball valve
Shotcrete gun without additive inlet -
U bend hose for filling 1106250 Ø 50 coupling cams and air inlet with 1/2"
quick connection
Deflectors for shotcrete gun, without
1107570 U-shaped steel pipe Ø 25 1106251
additive inlet
101