Page 100 - IMER_2021-07_MPT_cat_en_Neat

PRO-TEK LINE Compatible Accessories

Stators and rotors Series “D” Dimensions Length 273 mm (in 10.74) x Diameter 90 mm (in 3.5)
Dedicated to Three-phase machines

1107021 Rotor D6-3
D6-3 Orange Packaging 6 pieces for single code
Recommended for: 1107020 Stator D6-3
• Cement / lime / gypsum plaster based
• Stucco
• Binders / mortars for injections
• Glues for thermal insulation coatings 1107017 Rotor D6-3 FLEX
• Fireproofing
• Self-levelling screeds for thicknesses up to 1.5 cm
Pressure: bar 30 (PSI 435)
Maximum grain size: 3 mm (in 0.12) 1107037 Stator D6-3
Flow rate at 400 rpm: 20 l/min (Gal/min 5.3) NO SPINNING
1107163 Rotor D6-3 w ith Tab

D5-2.5 Grey Packaging 6 pieces for single code
Recommended for:
• Cement / lime based plasters 1107023 Rotor D5-2.5
• Structural plasters
• Restorative plasters Stator D5-2.5
• Structural reinforcement mortars 1107040 NO SPINNING
• Grout / Core-Fill Grout
• Fireproofing
Pressure: bar 25 (PSI 363) 1107044 Rotor D5-2.5 FLEX
Maximum grain size: 3mm (in 0.12)
Flow rate at 400 rpm: 25l/min (Gal/min 6.6)

D7-2.5 White Packaging 6 pieces for single code
Recommended for:
• Cement / lime based plasters
• Structural plasters
• Restorative plasters Stator D7-2.5
• Structural reinforcement mortars 1107041 NO SPINNING 1107025 Rotor D7-2.5
• Grout / Core-Fill Grout
• Fireproofing
Pressure: bar 25 (PSI 363)
Maximum grain size: 4mm (in 0.16)
Flow rate at 400 rpm: 27 l/min (Gal/min 7.2)

D8-2 Black Packaging 6 pieces for single code
Recommended for: 1107027
• Grout / Core-Fill Grout Rotor D8-2
• Self-levelling cement-based screeds
• Self-levelling anhydride-based screeds 1107042 Stator D8-2
• Structural reinforcement mortars NO SPINNING
• Fireproofing
Pressure: bar 20 (PSI 363) 1107043 Rotor D8-2 Flex
Maximum grain size: 3mm (in 0.12)
Flow rate at 400 rpm: 34 l/min (Gal/min 9)

D8-1.5 Ocher Yellow Packaging 6 pieces for single code
Recommended for: Rotor D8-1.5
• Self-levelling anhydride-based screeds 1107031 (Green) MONO
• Thermal insulating screeds based on cork or polystyrene
• Insulating plasters based on polystyrene or cork 1107028 Stator D8-1.5
• Structural reinforcement mortars CLAMP
• Grout / Core-Fill Grout
Pressure: bar 15 (PSI 218) 1107029 Rotor D8-1.5 with tab
Maximum grain size: 5mm (in 0.16)
Flow rate at 400 rpm: 38l/min (Gal/min 10)

D4-1/2 Lemon Yellow Packaging 6 pieces for single code
Recommended for:
• Glues for coatings
• Touch pointing 1107032 Stator D4-1/2 1107033 Rotor D4-1/2 MONO
• Finish coat CLAMP
Pressure: bar 25 (PSI 363)
Maximum grain size: 3mm (in 0.12)
Flow rate at 400 rpm: 13l/min (Gal/min 3.4)

98