Page 96 - IMER_2021-07_MPT_cat_en_Neat

MIX 360 R

Planetary mixer with forced action for premixed mortars in bags or in silos and traditional mortars
50/60 Hz 60 Hz
Mix 360 R 400V 50/60Hz Tph - 3 kW Mix 360 R 230V/60Hz Tph - 3 kW
Sph
1194591 1194599
Mix 360 R with Honda petrol engine 8.1 kW
1194597

Tph
x10

Sph

Tph

The design of the mixing paddles With the central jet tube, the
and the rotational satellite provide water is released in the centre
homogeneous mixtures in short of the drum over the rotating
times even with particularly heavy diffuser, which distributes it over
materials. The double thickness the entire surface of the material
steel bottom limits wear due to to speed up mixing, also limiting
particularly abrasive materials. the dust in the air.

Description Operation
Mix 360 is a forced action planetary mixer with a rotary satellite. It’s the The machine must be positioned flat on the support legs.
ideal solution for mixing large quantities of premixed bagged products or
material extracted from a silo in the shortest possible time. It is also suitable When the machine is turned on, the mixer paddles turn clockwise. Begin
for mixing traditional products packed on site. the first bag of material by breaking it on the bag breaker located above
the grate, and then add the water for the mixture. After adding the water,
The exclusive I-Dust grate (optional) with integrated bag breaker placed in continue to load the remaining product without interruption, being
a horizontal position facilitates the loading of bags of material with minimal careful not to exceed the water level.
effort by the operator. The exclusive I-Dust grate significantly reduces the
dispersion of dust in the surrounding environment when connected to a Initially pour sand into the drum and, subsequently, all the water for the
vacuum cleaner. mixture when mixing traditional products (such as mortar for masonry).
Then you can proceed to pour the bags of cement and finally the sand.
Suitable for mixing:
• Premixed or traditional cement screed, also with the addition of fibers and The rotation of the paddles moves the mixture from the bottom
/ or additives upwards and from the centre outwards. The satellite blade rotates
• Pre-dosed or traditional lightened screed with expanded clay with grain counterclockwise with respect to the movement paddles, moving and
size> 20 mm breaking the mass of the material several times. After a few seconds of
• Colored rubber granulate for anti-trauma floors waiting, the product is mixed with no lumps, concrete balls or fibers.
• Self-levelling anhydride / cement based screeds
• Thermal insulating screeds based on cork or polystyrene The product can be easily discharged through the discharging outlet with
• Cement / lime / gypsum based plasters PAT (“Pull up And Turn”) hermetic closure, by pulling the appropriate
• Fiber-reinforced structural plasters also with the addition of additives lever upwards and turning it counterclockwise.
• Restorative plasters
• Traditional plasters For cleaning, simply pour water into the drum with the machine on,
• Binders / mortars for injections allowing the paddles to make a first general wash. Once the machine
• Insulating plasters based on polystyrene or cork is turned off and the grate is open, cleaning of drum and grate can be
• Mortars for fiber-reinforced reinforcement completed. At the end, the residual water can be discharged into a
• Premixed / traditional masonry mortars container placed under the discharge outlet.
Sph
• Concrete with 6 mm grain size
• Concrete for continuous draining floors
• Fireproofing
In combination with a plastering pump it can form a mixing and pumping unit.
94 Tph

Sph
Sph

Tph
Tph

Sph

Tph