Page 454 - Chief Architect Reference Manual

Chief Architect X10 Reference Manual

2 The Wall Options settings control how • Check Sides to locate the sides of cabinet
dimensions locate interior walls where objects. The sides do not need to be per-
they intersect exterior walls, and only apply pendicular to the dimension line.
to interior walls drawn perpendicular to the • Check Corners to locate the corners of
exterior walls they intersect. They are cabinet objects. Angled cabinets are
available in the Auto Exterior Dimension dimensioned to their corners at a right
Defaults dialog but not the other Auto angle to the dimension line. A cabinet’s
Dimension Defaults dialogs. front or sides do not need to be perpen-
• Select Interior Wall Centers to have dicular or parallel to the dimension line
dimension lines locate the centers of inte- for its corners to be located.
rior walls. If Wall Dimension Layer is • Check to locate the Centers of cabinet
selected above, dimensions locate interior objects. A cabinet’s front or sides do not
walls at the center of their Main Layers. need to be perpendicular or parallel to the
See “The Main Layer” on page 383. dimension line for its center to be
• Select Primary Wall Side to have located.
dimension lines locate one side of interior • Check to locate cabinet Countertop
walls. edges. A cabinet’s front or sides must be
• Select Both Wall Sides to have dimen- perpendicular or parallel to the dimension
sion lines locate both surfaces of interior line for its countertop to be located. In
and exterior walls. Wall thicknesses are elevation views, only the height can be
also dimensioned. located when the dimension is being
• Check Interior Walls Only for dimen- drawn. Does not affect Custom
sions to ignore the interior surface of Countertops .
exterior walls and the thicknesses of inte- • Check to locate top and bottom Back-
rior walls. Only available when Both splash edges in elevation views.
Wall Surfaces is selected.
• Check to locate top and bottom Toe Kick
edges in elevation views.
Note: Walls specified as No Locate will not be
located by some dimension tools. See “No • Check to locate tops and bottoms of
Locate” on page 366. Moldings in elevation views.

3 The Cabinets options affect how 4 The Fixtures/Appliances options
affect how dimension lines locate
dimension lines locate objects cabinets appliances and other fixtures including
and cabinet fillers within the Reach area and hardware, millwork, sprinklers, and
are also available in the Auto Interior and Geometric Shapes. These options are also
Auto Elevation Dimension Defaults available in the Auto Interior and Auto
dialogs. See “Using Dimensions” on page Elevation Dimension Defaults dialogs.
620.
• Check to locate the Sides/Corners of
appliances and other fixtures. For sides to

454