Page 461 - Chief Architect Reference Manual

Auto Elevation Dimension Defaults

Defaults dialog. See “Auto Story Pole This panel is only available in the Auto
Dimensions” on page 471. Story Pole Dimension Defaults dialog. It is
• Uncheck Dimensions Between not found in the Auto Elevation Defaults or
®
Elevation Markers to suppress the outer the NKBA Auto Elevation Dimension
dimension string that measures the Defaults dialogs.
distances between each of the elevation
markers. Only available in the Auto Marker Format Panel
Story Pole Dimension Defaults dialog.
The settings on the MARKER FORMAT panel
control the format of the elevation value
Inner Format Panel
stated in elevation markers’ bottom line of
The settings on the INNER FORMAT panel text on a Story Pole and are similar to those
control the format of the inner string of on the PRIMARY FORMAT panel of the
dimensions on a Story Pole, if present, and Dimension Defaults dialog. See “Primary
are similar to those on the PRIMARY FORMAT Format Panel” on page 449.
panel of the Dimension Defaults dialog. See • C h e c k Use Default Formatting to use
“Primary Format Panel” on page 449. the Primary Format settings of the
• Check Use Default Formatting to use currently active Dimension Defaults as
the Primary and Secondary Format the Marker Format.
settings of the Dimension Defaults that This panel is only available in the Auto
are active when a Story Pole is created as Story Pole Dimension Defaults dialog. It is
the Inner Format. See “Multiple Saved not found in the Auto Elevation Defaults or
Defaults” on page 89.
®
the NKBA Auto Elevation Dimension
This panel is only available in the Auto Defaults dialogs.
Story Pole Dimension Defaults dialog. It is
not found in the Auto Elevation Defaults or Once a Story Pole dimension has been
created, Additional Text can be added to the
®
the NKBA Auto Elevation Dimension bottom line of marker text in the Dimension
Defaults dialogs.
Line Specification dialog. See “Segments
Panel” on page 485.
Outer Format Panel
The settings on the OUTER FORMAT panel Locate Objects Panel
control the format of the outer string of The settings on the LOCATE OBJECTS panel
dimensions on a Story Pole and are similar to specify whether or not dimension lines locate
those on the PRIMARY FORMAT panel of the specific types of objects and will vary
Dimension Defaults dialog. See “Primary depending on which Dimension Defaults
Format Panel” on page 449.
®
dialog is open. In the NKBA Auto
• Check Use Default Formatting to use Elevation Dimension Defaults dialog, only
the Primary and Secondary Format the CAD Objects options are available.
settings of the currently active Dimension
Defaults as the Outer Format.

461