Page 483 - Chief Architect Reference Manual

Dimension Line Specification Dialog

• Specify a Number Height for the • Select an Angle Style radio button to
selected dimension. Type “D” in the box specify the how the selected dimension’s
to reset the number size to the default. angle value displays. See “Dialog Num-
“Dynamic Defaults” on page 88. ber/Angle Style Dialog” on page 137.

Primary Format Panel

To enable the settings on the PRIMARY FOR- The settings that follow are the same as those
MAT panel of the Dimension Line on the same panel of the Dimension
Specification dialog, uncheck Use Default Defaults dialog, but apply only to the
Formatting. selected dimension line(s). See “Primary
Format Panel” on page 449. Not available for
Angular Dimensions.

Secondary Format Panel

To enable the settings on the SECONDARY The settings that follow are the same as those
FORMAT panel of the Dimension Line on the same panel of the Dimension
Specification dialog, uncheck Use Default Defaults dialog, but apply only to the
Formatting and then check Include Second selected dimension line(s). See “Secondary
Format. Format Panel” on page 451. Not available for
Angular Dimensions.

Marker Format Panel

The settings on the MARKER FORMAT panel • C h e c k Use Default Formatting to use
control the format of the elevation value the Primary Format settings of the
stated in elevation markers’ bottom line of currently active Dimension Defaults as
text on a Story Pole and are similar to those the Marker Format.
on the PRIMARY FORMAT panel of the Leading and trailing text can be added before
Dimension Defaults dialog. See “Primary and after the elevation value in an elevation
Format Panel” on page 449.
marker’s bottom line of text on the SEG-
This panel is only available if the selected MENTS panel of the Dimension Line
dimension line is drawn vertically in a cross Specification dialog. See “Segments Panel”
section/elevation view. See “Detailing Cross on page 485.
Section/Elevation Views” on page 1055.
Extensions/Markers Panel

The EXTENSIONS/MARKERS panel is not
available for dimensions selected as a group

or for Angular Dimensions .

483