Page 484 - Chief Architect Reference Manual

Chief Architect X10 Reference Manual

Opening this panel will turn off Legacy
Compatible Extensions if it is enabled in
the Dimension Defaults dialog. See “Exten-
sions Panel” on page 456.

1 Selected Extension - Choose an of the Dimension Defaults dialog, but apply
extension line associated with the to the extension lines associated with the
currently selected dimension from the drop- selected dimension line only. See
down list. The Selected Extension can then “Extensions Panel” on page 456.
be edited here. • Click Apply to All to apply the settings
for the Selected Extension line to all
When a dimension line is selected, extension lines associated with the
each extension line’s number displays selected dimension.
beside it.
3 Check Proximity Fixed to specify a
• Uncheck Use Plan Default to enable the fixed distance between the marked
three settings that follow. Check this box object and the dimension line. You can only
to restore the default settings to the fix the proximity for a single extension line.
Selected Extension line. See “Dimension • Distance to Marked Object - When
Defaults Dialog” on page 447. Proximity Fixed is checked, you can
specify the distance from the dimension
2 The Extension Length settings are the line to the marked object using a positive
same as those on the EXTENSIONS panel

484