Page 578 - Chief Architect Reference Manual

Chief Architect X10 Reference Manual

1 Window Type - Select the type of • Specify the height to Bottom, measured
window from the list. The first entry in from the selected Elevation Reference to
the list is the “Use Default”, which is set in the bottom of the window frame.
the Window Defaults dialog. • Specify the Depth of the selected Wall

2 Specify the Size and Position of the Niche, measured from the wall surface to
selected window. the back of the niche. Only available for
Wall Niches.
• Specify the window’s Width and Height.
These values include the window frame.
• Select the Elevation Reference from the Note: When either the Floor to Top or Floor
drop-down list. This determines where to Bottom setting is modified, the other will
adjust in response to prevent the window’s
the next two settings are measured from Height from changing.
and also affects their setting labels.
• Specify the height to Top, measured from 3 The Component Options affect
the selected Elevation Reference to the windows with movable sections and are
top of the window frame. not available for Pass-Throughs, Fixed glass
windows, mulled units, or window symbols.

578