Page 45 - catalog final tipar_Neat

CERAMIC BONDING PASTE

The metal framework should be prepared according to the manufacturers instructions.
Apply the bonder in a thin layer but mask the framework complete.
IMPORTANT:
Do not moisten dried Bonder. Close the cap after using!
The bonder has a yellowish, slight shiny surface.
NOTE: The colour of the fired bonder depends on the alloys compounds.
Preheating temperature: 550 Final temperature: 980
Drying time: 6 min Holding time: 1 min Packaging:
Plastic box 4gr Art. nr. CBP4327
Raise of temperature : 80 /min Appearance: Slight shining Plastic box 30gr Art. nr. CBP30328

CERAMIC UNIVERSAL SOLDER

Universal lot for all non precious alloys
- durable in the patient’s mouth, good colour resistance, easy to handle
Packaging:
Plastic 25gr Art. nr. CUS25329

CoCr LASER WELDING WIRE

The laser weld is so precise; the welding wire can be added only where it’s needed.
There is never any unintentional overflow. Laser welding wire is the parent alloy
and will never break down in strength and never discolor over time.
• A good laser weld is typically 90% as strong as the virgin alloy or 250 times
stronger than the best solder.
• welding wire can also be used to bridge small gaps, fill porosity holes and
reinforce existing parts or welds.
• Welding wire is also used any time additional metal is required to complete a

weld or build up material. Packaging: Available: 0,25mm Art. nr. LW2025330
Roll 2m 0,35mm Art. nr. LW2035331
0,5mm Art. nr. LW2050332
45