Page 33 - ProfilGate-Loc8

Automated Guided Vehicles
(AGVs)

ProfilGate® st55/st65
The ProfilGate® system is well suited to
clean the castors and wheels of almost
any AGV. AGVs mostly travel along the
same route and therefore wear down the
coated floors.

By cleaning the wheels regularly, you will
notice less wear and tear on the floors.
Their lifetime is extended. In addition, you
prevent dirt distribution from one area to
another.

ProfilGate® cleaning fields can be simply
retrofitted with a guiding rail for AGV.

Above-ground roller cleaning Integrated into Cleaning lock in front
with ramps loading docks of the lift

ProfilGate® b55 with ramps ProfilGate® st55 ProfilGate® st55
®
A temporary or permanent above-ground ProfilGate can also be directly integrated A ProfilGate® in front of the lift is perfectly
solution is often preferred when it is into loading bridges. suitable to avoid dirt entry into the clean
not possible to install the units into the production floor.
Entry of dirt from articulated vehicles are
ground or if you require a flexible solution
often underestimated. The load beds are With regards to lifts equipped with
that can be moved to different areas. bilateral doors, ProfilGate® can be
continuously contaminated by traffic and
Flat ramps allow for driving over the frequent loading and unloading. installed inside the lift as well.
cleaning solution with almost any vehicle.
ProfilGate® stops and collects the dirt
directly on the loading ramp.

33