Page 5 - 圣亚画册4

FH-780 /JUN

Hot Air Seam Sealing Machine

特 点 : 1. Microcomputer controlled fully,interface for operation
2. Set up the parameters according to the products or workers in
advance ,shift quickly and raise efficiency.
1、完全微电脑控制, 3. Speed govering by PWM electric motors of microcomputer,
简单便捷的操控 界 improve its characteristics and achieve zero current inverting to
面。 expand its service time.
4. PID heating controller is optimized to set the temperature fast to
2、预先根据产品或 raise efficiency.
工人设置参数,快速转 5. Perfect heater protection.Restart it as soon as the heater is turned
换,提高生产效率。 off.Alarm oftemperature anomaly.

3、微电脑PMM电机 热风枪嘴宽度 发热管功率 发热管温度
调速,改善电机低速转 ( Width of hot air trachea ) ( Power of heating tube ) ( Heating tube temperature )
矩特性,并实现无电流 25 mm 2500 W
换向,提高寿命。 600 ℃ ( Max )
上柱压轮压力 压轮直径 压轮宽度
4、特别优化的PID加 ( Pressure of upper press roller ) ( Diameter of press roller ) ( Width of press roller )
热控制器,可迅速达到 1-2 kg/cm³ 65 mm 25.4-30 mm
设定温度,提高生产效
率。 额定功率 额定频率 额定电压
( Rating power ) （ Rating frequency ） ( Rating voltage )
5、完善的加热器保 ≤ 3000 W 50 HZ 220V AC
护,关闭加热后可马上
重新开启。温度异常 总气压 电机功率 速度
提醒。 ( General vapor tension ) （ Power of motor ） ( Speed )
3.5-5 kg/cm³ 60 W 2-26 m/min

02