Page 12 - All Task Solutions - KENT Best Seller Range 2019

Adhesives, Sealers, Adhesive Tapes

One Shot - KE83915

A very powerful and fast acting cleaner for the air induction side of fuel injection systems and carburettors.

Part Nº: KE83915 (SOS) - 500ml aerosol

Features Benefits

• High pressure spray • Blasts off dissolved varnish, gum & grease
• Fast drying • Leaves no oily film
• Safe on catalytic converters & oxygen sensors • No comebacks
• Suitable for all petrol engines • Reduces inventory
• Frees carburettor valves, linkages, thermostat • Engine runs smoothly & efficiently
coil, choke pistons, automatic choke coils

Applications Instructions

Originally sold as a carburettor cleaner, Injection systems:
however with the advancement of fuel injection 1. Remove no-load valve and rinse with SOS.
on vehicles, SOS has found a new niche as 2. With engine warm and running, disconnect air intake as
perhaps the best cleaner for the air induction close to injection system as possible. Spray One Shot into
side of engine management systems in the intake pipe for 5 - 10 seconds.
market. It is a very powerful cleaner that is 3. Repeat if necessary, reconnect air intake.
extremely efficient at removing residue from
throttle bodies, PCB valves and other injection Carburettor systems:
components. Vehicles are able to run on SOS, 1. With engine warm, remove air cleaner and spray into
so the product can be safely sprayed into carburettor throat to free choke valve.
these areas whilst the vehicle is running, 2. Block off and disconnect fuel supply and allow float
therefore flushing all contaminants through the chamber to run dry.
exhaust system. With customers specialising 3. Fill float chamber with SOS and allow to soak for 5 - 10
in older vehicles, SOS is a 1st class minutes.
carburettor cleaner. 4. Start engine and run at various revs to clean system,
replenish float chamber with SOS for one minute then run
until empty.
5. Reconnect fuel lines and spray all other linkages and
control valves on the carburettor.
WARNING. Beware splash-back into eyes. Do not spray onto
exposed painted surfaces.