Page 8 - All Task Solutions - KENT Best Seller Range 2019

Cleaners, Refinishing Products & Polishes

Plastic Dressing - KE34706

Plastic dressing when applied to plastic is absorbed into the pores of the plastic and cures leaving an “as
new” uniform dark colour film. Plastic Dressing is suitable for all exterior plastic; Bumpers, bumper
inserts, side trim, door mirror surrounds, spoilers, skirts, roof inserts and vinyl roofs.

Part Nº:
KE34706 Plastic Dressing (KPD) 400ml aerosol

Features Benefits

• Silicone free • Safe for bodyshop
• Reconditions plastic • Enhances cosmetic appearance
• Weatherproof once cured • Will not easily wash or weather off
• Economical in use • Value for money
• Pleasant fragrance • Re-odorises plastics
• Non-harmful • User friendly

Application Method

Due to the dust and dirt in Body Shops it is common for plastic trim to become ingrained with dirt, which
leaves plastics looking faded and discoloured, even after they have been cleaned. It is necessary to return
the vehicle to customers in an ‘as new’ condition. This leaves bodyshops with a particular problem as
products typically used to enhance appearance often contain silicone so cannot be used. Plastic Dressing is
a product designed to enhance the appearance of weathered plastics and vinyl's by restoring the colour to a
natural sheen. It contains no silicone so it is completely safe for use in bodyshop, and it is also non-harmful

Instructions for use

1. Thoroughly clean all trim to be treated using Kent All-Purpose Foam Cleaner. Remove any residual
contamination with Kent Plastic repair cleaner
2. Spray product onto a clean cloth or damp sponge. Apply sparingly over the surface of the plastic,
ensuring the entire area is covered.
3. Allow 30 minutes for product to be touch dry. Drying will be accelerated in direct sunlight.
4. Remove any unwanted application on body panels or glass with Kent All-Purpose Foam Cleaner or Glass
Kleen.