Page 62 - SideWinder®

®
SideWinder

Maintenance

Parts Identification
Motor Cable Assembly
Utility Supply Lines: Motor Cable
1) The Motor Cable should be wired to the Motor according to the
site voltage.
2) The cable is routed along the Gearbox Mount Plate, through the
sleeve on the Tie Bar and into the Junction Box where it is ready
to be connected to the main power cable.
3) If necessary, zip tie the motor cable to the Gearbox Mount Plate
and for additional protection spiral wrap the cable to prevent
wear.
4) When connecting to the Main Power allow extra length in the
Motor Cable to accommodate full extend and retract of the
SideWinder® without becoming too tight or pulling on the fittings.
Gearbox Mount
Plate Ref.
Junction Box
Ref.

Motor/Gearbox Ref.
MOTOR CABLE: 1ELECT-CB874
96 INCH MOTOR LEAD

Utility Supply Lines: LED Supply Cables

1ELECT-FS109

LED Supply Cable Assemblies
Lower Hub LED Cable: 110716
Upper Hub LED Cable: 110886
1ELECT-FS135 (2)

1ELECT-FS136 (2)

GSHS-1625W-3-8
BLK HEAT SHRINK

1ELECT-CB839
Lower Hub Cable Length: 81”
Upper Hub Cable Length: 130”

60 Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL955