Page 11 - Wave Wrap™
P. 11
WAVE WRAP™
Specifications
Requirements
Physical
Tunnel space required 204”
Unit height 121"
Utility
Electrical 110VAC
Hydraulic 4 GPM @ 900 PSI
Pneumatic .3 CFM @ 90 PSI minimum 120 PSI maximum
Water (2) 3/4” pipe @ 8 GPM @ 40 PSI
Output
Physical
Vehicle clearance, height 90”
Utility
Pneumatic .3 CFM @ 90 PSI
DISCONNECT AND LOCKOUT ELECTRICAL POWER BEFORE SERVICING ANY
EQUIPMENT!
CAUTION
Always wear safety glasses when performing maintenance on any equipment
CAUTION
It is recommended that a licensed electrician is contracted to perform all electrical installations.
Note: YOUR HYDRAULIC SYSTEM MUST BE CAPABLE OF ADJUSTMENT TO 76 RPM
AT 900 PSI WHILE LOADED AGAINST VEHICLE. PLEASE VERIFY YOUR
SYSTEMS CAPABILITY TO MEET THESE SETTING WHILE RUNNING A
VEHICLE PRIOR TO INSTALLING PIECE OF EQUIPMENT!
CAUTION
A compressed Air System should be set correctly to support 90 PSI necessary to operate
equipment, but should never be set to deliver more than 120 PSI air pressure to the Belanger
specified equipment.
1MANUL864 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 9
