Page 18 - Airblade® Dryer - Mix and Match

AIRBLADE® DRYER Mix and Match

Introduction

Before You Get Started

Tools needed for installation:
Hammer drill with a 1/2” and a 5/8” bit Work gloves
Tape measure (12 foot or greater) Tin snips
25 foot extension cord Safety glasses

Miscellaneous hand tools Level
Leveler Fork-lift

Note: Uncrate and inspect shipment for damage, and to verify that all pieces are there. If there
is any damaged equipment, file a claim with the trucking company immediately. Receiving
party is responsible for filing claim with trucking company. Notify your local distributor
or Belanger, Inc. immediately. If shipment is determined damaged or incomplete.

CAUTION

It is recommended that a licensed electrician is contracted to perform all
electrical installations.

Disconnect and lockout electrical power before servicing any equipment!

Always wear safety glasses when performing maintenance on any equipment.

14 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (810) 349-7010 * Fax (810) 380-9681 1MANUL011