Page 90 - Airblade® Dryer - Mix and Match
P. 90
AIRBLADE® DRYER Mix and Match
Installation
10-Nozzle Frame Assembly: Wall Mounted
• Secure the Housing Lift Assembly to the fork as shown below.
• Move the housing to the appropriate location.
• Retighten the AirBlade® Housing Bracket and remove the Housing Lift Assembly.
• Repeat these steps on the other housing.
• When completed remove the Housing Lift Assembly, replace the fasteners and store
the Lift Assembly for future use.
13) Once the housings are centered to the door you can tighten the fasteners that attach the
head beam to the wall mount brackets.
14) Once the housings are centered to the door you can tighten the AirBlade® housings
bracket fasteners and the fasteners that attach the head beam to the wall mount
brackets.
86 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (810) 349-7010 * Fax (810) 380-9681 1MANUL011
