Page 13 - Low Side Washer

LOW SIDE WASHER

Specifications

Requirements
Physical
Tunnel space required 68”
Utility
Electrical 110VAC
Hydraulic 4 GPM @ 900 PSI

Pneumatic .3 CFM @ 90-PSI minimum 120-PSI minimum
Water (2) 3/4” pipe @ 6 GPM @ 40 PSI

Output
Utility
Pneumatic .3 CFM @ 90 PSI

Note: Schedule 40 pickled black pipe or hydraulic stainless steel tubing @ 1/2” diameter is
recommended on all hydraulic installations.

DISCONNECT AND LOCKOUT ELECTRICAL POWER BEFORE SERVICING ANY
EQUIPMENT!

Always wear safety glasses when performing maintenance on any equipment

It is recommended that a licensed electrician is contracted to perform all electrical
installations.

A compressed Air System should be set correctly to support 90 PSI necessary to operate
equipment, but should never be set to deliver more than 120 PSI air pressure to the Belanger
specified equipment.

Note: YOUR HYDRAULIC SYSTEM MUST BE CAPABLE OF ADJUSTMENT TO 76 RPM
AT 900 PSI WHILE LOADED AGAINST VEHICLE. PLEASE VERIFY YOUR
SYSTEMS CAPABILITY TO MEET THESE SETTING WHILE RUNNING A
VEHICLE PRIOR TO INSTALLING PIECE OF EQUIPMENT!

1MANUL858 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 9