Page 14 - DuraTrans XD® Conveyor
P. 14
DURATRANS XD® CONVEYOR
Introduction
Before You Get Started
Tools Needed for Installation:
Fork lift 50 foot extension cord
Hammer drill with 1/2” bit Tin snips
Tape measure (50 foot or greater) Safety glasses
Pry bar Work gloves
Level Miscellaneous hand tools
Welder Torches
Disc grinder Transit
Shim plates Hydraulic hand jack
C-clamps Chalk line
Field Supplied Items Required:
· Steel grating to allow proper water drainage. Quantity is determined per specific
installation
DISCONNECT THE MAIN POWER SUPPLY, LOCKOUT ELECTRICAL POWER AND
DISSIPATE ALL POTENTIALLY HAZARDOUS ENERGY SOURCES PRIOR TO
SERVICING OR MAINTAINING EQUIPMENT!
CAUTION
Always wear safety glasses when performing maintenance on any equipment
CAUTION
It is recommended that a licensed electrician is contracted to perform all electrical installations.
CAUTION
A compressed Air System should be set correctly to support 90 PSI necessary to operate
equipment, but should never be set to deliver more than 120 PSI air pressure to the Belanger®
specified equipment.
10 Belanger, Inc®. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL010
