Page 23 - Low Side Washer Signature® Series

LOW SIDE WASHER Signature ® Series

Installation

Waves and Fins Cleaning Material
Shaft Brackets
1) Locate the Side Wheel Wave boxes and open them upside down to expose the drive plate
assemblies.
Drive plate assembly

Drive plate

2) Remove the drive plates and secure them to the wheel shafts at 10-1/2” (26.7 cm) above the floor
or the Conveyors top surface by tightening the shaft brackets into place.

Driver Side Passenger Side
Shaft Bracket

10-1/2” 10-1/2”
Floor
To Conveyor Surface To Floor

Note: Certain machine configurations require the driver side wheel to use 22” Fins™.
Otherwise, all Fins™ will be 24”. If you have received 22” Fins™ with your order, load
wash material accordingly.

1MANUL860 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 19