Page 24 - Low Side Washer Signature® Series

LOW SIDE WASHER Signature ® Series

Installation

Waves and Fins Cleaning Material
Lower Side Wheels
The wash material fills for the lower side-wheels are the same as the Belanger, Inc. Low Side
Washer. This section will assist in the installation of the lower side-wheel wash material.
1) Install bottom drive wave and seat counter-bore over the drive plate.

Counter-bore

2) Locate the 24” Fins™. Place 4 pieces over pins on bottom drive Wave™. One piece of wash
material should straddle the opening on each Wave™.

3) Install next Wave™ with slot opposite the opening on the previous one.
4) Repeat steps 2 and 3 until 9 waves have been stacked on top of the bottom Wave™ (total of 10
rows of wash material).
5) Press down on the top Wave™ stack to seat the wash material and verify the bottom Wave™ is
on the drive plate.

20 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL860