Page 28 - Wash Around

WASH AROUND

Installation

Waves and Fins Cleaning Material
Lower Side Wheels
The cleaning material fill for the lower side wheels are the same as the Belanger, Inc. Wave Low Side
®
Washer . This section will assist in the installation of the lower side wheel cleaning material.
CAUTION

Do not install any cleaning material until all equipment has been installed, turned on and
checked for hydraulic, pneumatic and water leaks.

1) Install bottom drive wave and seat counter-bore over the drive plate.
Counter Bore

2) Locate the 24” Fins™. Place 4 pieces over pins on bottom drive Wave™. One piece of wash
material should straddle the opening on each Wave™.

3) Install next Wave™ with slot opposite the opening on the previous one.
4) Repeat steps 2 and 3 until 9 waves have been stacked on top of the bottom Wave™ (total of 10
rows of cleaning material).
5) Press down on the top Wave™ stack to seat the cleaning material and verify the bottom Wave™
is on the drive plate.

26 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL798