Page 25 - Wash Around

WASH AROUND

Installation

Utilities (Hydraulic Drive)
Hydraulic Feeds
This section will explain the installation of hydraulic connections.
The stainless steel tubing atop the head frame assembly can be turned 180 degrees to accommodate
whichever side of the building your hydraulic unit is located.
1) Connect hoses to motors per diagram below.
Overhead view of section of head frame assembly
Wheel Rotation Wheel Rotation

Return from
driver side
motor and Feed to driver Feed to passenger
back to side motor DIRECTION side motor
hydraulic of Return from
supply tank TRAVEL passenger
side motor

Feed from
hydraulic
supply tank

Note: Above image shows typical driver side hydraulic installation.
Confirming Wheel Rotation
CAUTION

Be sure to match the wheel rotation shown below. If the rotation is opposite as show below,
reverse the hydraulic feed lines to the motor.

Overhead view

1MANUL798 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 23